Fine Adjustment Of The Motor; Stroboscope Testrecord User Manual - Clearaudio I nnovation Basic User Manual

User manual
4. Fine adjustment of the
The motor adjustment is already pre set at the factory. Through the transport some small speed
deviations can occur. Please check the speed before using the turntable for the first time.
For the correct adjustment of the speed please put the recommended Clearaudio
Testrecord
on the platter. Follow hereby the instruction of the
To check the speed with highest accuracy please use the Clearaudio
(www.analogshop.de).
On the front side of your turntable there are three setting trimmers (see pic. 11).
Pic. 12: Fine adjustment of the motor
If you like to adjust the speed 33 1/ 3 rpm, take the screw driver (see accessories) and turn the left
trimmer until you have reached the right speed according to the
Stroboscope Testrecord
manual
- Turning the trimmer counter clockwise = reduces the turntable speed
- Turning the trimmer clockwise = raises the turntable speed
Please proceed with the speed adjustment for 45 rpm and 78 rpm in the same way!
Please note:
If the turntable does not reach the correct speed, the sensor or the scale ring could be dirty or dusty.
To clean the sensor, please take off the platter very carefully!
Clean the sensor and the scale ring with a little isopropyl alcohol and a cotton bud.
Be careful and avoid any scratches on the sensor or the scale ring!
If the motor has further more speed variations please contact your nearest authorized Clearaudio
dealer or directly the Clearaudio factory (address on page 13).
If the turntable is not in use, disconnect the unit completely from the power supply by removing the
main plug from the socket.
Now you are finally ready to play your vinyl records.
We wish you a lot of pleasure with your new
Made in Germany
I nnovation Basic
- Left trimmer = setting 33 1/ 3 rpm
- Middle trimmer = setting 45 rpm
- Right trimmer = setting 78 rpm
).
Innovation Basic
motor
Stroboscope Testrecord
Speed Light
(near turntable motor)
(near turntable bearing)
Stroboscope Testrecord
turntable.
Stroboscope
user manual.
(Art. No. AC039)
(see user
11