Specifications; Technical Specifications - GarrettCom Magnum ITS Blade Installation And User Manual

Magnum ITS Blade Hardened Switches for 2070's
1.0

SPECIFICATIONS

1.1

Technical Specifications

Ports Performance
Fiber, ports #1 and # 8, full duplex at 100Mbps
Copper (RJ-45) ports 2-7: auto-negotiating 10/100 Mbps,
MDI / MDIX auto-crossover is automatically handled
Network Standards
IEEE 802.1p QoS prioritization, 802.3u, 802.3x flow control
100Mb: Ethernet IEEE 802.3 100BASE-TX, 100BASE-FX
10 Mb: Ethernet IEEE 802.3, 10BASE-T
Packet-Processing
Filtering and Forwarding Rate from 100Mbps ports: 148,800 pps max
Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max.
Processing type: Store and Forward, all ports non-blocking
Auto-learning: 4K-address table, shared for all ports
Packet buffers: 256 KB, dynamically shared
Latency (not including packet time):
Path Delay Value: 50 BT on all ports
Maximum Ethernet Segment (or Domain) Lengths
10BASE-T (Unshielded twisted pair)
100BASE-TX (CAT 5 UTP)
100BASE-FX, full duplex: (multi-mode)
100BASE-FX, full duplex: (single-mode)
100BASE-FX, full duplex: (single-mode, long)
Operating Environment
Ambient Temperature: 40°F to 167°F (-40°C to 75°C)
Storage Temperature: -40° to 185°F (-40°C to 85°C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Conformal coating applied as standard for humidity protection
Altitude: -200 to 15,000 ft. (-60 to 5,000m)
Operating Shock and Vibration: Designed to exceed CalTrans and ATC
requirements and Telcordia GR-63-CORE Sections 4.3.1 and 4.4.3
Power Supply (Internal
Power Input Voltage: 5VDC at 1.9Amps, 2070 backplane pins ABC29
Power Consumption: 8 watts typical, 10 watts maxm.
www GarrettCom com . .
Installation and User Guide (02/03)
cold start down to 25°C
)
24VDC and -48VDC Power Supply
per TEES 03/02
2
100 to 10 Mbps: 5
10 to 100Mbps: 15
- 100 m (328 ft)
- 100 m (328 ft)
- 2.0 km (6,562 ft)
- 20.0 km (65,620 ft)
- 40.0 km (131,240 ft)
µ
s
µ
s