Magnum ITS Blade Hardened Switches for 2070's
Model 2070 Chassis Standards
Fits into slot A1 or A2, draws power from the Model 2070 chassis power
supply. Note- the ITS Blade is stand-alone for Ethernet operations; it
does not plug into any backplane signal pins
Network Cable Connectors -6 RJ-45 shielded female ports and 2-fiber port
100Mbps: Category 5 UTP/STP, fiber (50/125, 62.5/125 mm, or single-mode at
10 Mbps: Category 3, 4, 5 UTP (Note: auto-sensing does not sense cable type)
Mechanical
Dimensions: 8.70 in D x 1.6 in W x 7.0 in H
Weight: 0.5 lb. (0.25 kg.)
LED Indicators
PWR:
SPEED: (when LINK is ON): ON = 100Mbps; OFF = 10 Mbps
LINK/ACT: Steady ON for LINK with no traffic, blinking indicates port
F/H (RJ-45 ports only): ON = full-duplex, OFF = half-duplex
MTBF (Bellcore method)
Over 25 years MTBF @ 60°C.
Email
Agency Approvals
Emissions: meets FCC Part 15, Class A
Designed to meet TS-2 specifications
Warranty: Three years, return to factory
www GarrettCom com
.
.
9/125 micron)
(220 mm x 40.4 mm x 177 mm)
Steady ON when power applied
is transmitting / receiving.
sales@GarrettCom.com
Installation and User Guide (02/03)
for details
3
Made in USA