Figure 20. Add A Lora ® Device - STMicroelectronics ST25DV64KC User Manual

UM3146
Add a LoRa® device to The Things Network
®
Figure 20. Add a LoRa device
DT72448
®
An NFC communication takes place between the smartphone and the LoRa device. This NFC communication
uses the FTM mailbox of the ST25DV64KC to collect some information about the device.
A popup opens to confirm adding this device to the application on The Things Network. The popup displays some
information about the device, for example, its unique DevEUI. Here, provide a name to this device to facilitate its
recognition.
By default, the fields about the frequency plan, the LoRaWAN® version, and the regional parameters are filled
with the values recommended by the device. It is possible to modify them, but if the firmware has been properly
configured for the selected region (see Section 7.1 Firmware personalization), this should not be necessary.
Click continue. If the device add operation is successful, a Device added message is displayed at the bottom
of the screen. During this phase, the device is provisioned with some cryptographic keys that are used to obtain
®
access to a LoRa gateway during an Over The Air Activation. It is important to keep the smartphone on the
device during the phases showing a Please wait message.
The application requests setting the GPS location of the device.
UM3146 - Rev 1
page 18/33