Carrier CDII-184R1-0CTR4 Installation & Operation Manual page 41

9.3.1 Corded Remote's Indication and Buttons Description
Sr.No
1
2
3
4
5
6
Sr.No
7
8
9
10
11
9.4 Indoor Unit Operation by "Corded Remote"
1. POWER ON/OFF
Switch On "Main Power supply", Press
When turn ON, it will operate according to the setting shown on the Display unit.
"Mode Selection" changes are done by
2.
▪
FAN: The System will operate as the fan only .In this mode, the temperature setting and Sleep
Function will not operate.
▪
COOL: The System will operate as the cooling unit.
The Compressor will
• Increase Capacity if
• Decrease capacity if
• Stop
if
However, the compressor is subjected to 6-minutes delay protection each time it stops.
▪
DRY: The System will operate as the Humidifier.
*Note: In Dry mode, Fan Button will not operate.
"Temperature Settings" (Increase and Decrease) are done by "
3.
Press Temp "
deg C.
Indication
Mode
Auto Fan Speed
Fan Speed
Temperature
Temperature Unit
Fan
Buttons
Mode
Fan Speed
Temperature Down
Temperature Up
Power On/Off
Troom > Tset.
Troom < Tset.
Troom < Tset-1.5.
"down or Temp up "
Function
For Indication of Machine's Mode.
For Indication of Auto Fan Speed.
For Indication of Fan Speed.
For Indication of Temp.
For Indication of Temp. Unit.
For Indication of Fan Speed.
Function
For Selection of Machine's Mode.
For Selection of Fan Speed.
For Setting of Temperature Down.
For Selection of Temp. Up.
For Power On/Off the Machine.
Table.1
button to turn ON/OFF the Air Conditioner.
Button to Fan and Cool mode.
" button to set the temperature in a range of 18 to 32
41
" & " " Button.