Annexure 2 - Lock Out Tag Out Method (Loto) - Carrier CDII-184R1-0CTR4 Installation & Operation Manual

Brief description: As per the Carrier Cardinal Rule Policy this standard applies for all
electricians/technicians involved in electrical work in the factory premises/Sites.
#
1.
•
All employees must have this list Carrier India
Mandatory Fatality Prevention Review with them
and read through it before they start any electric
job.
•
Remove all conductive accessories (jewelry, chains
etc).
•
Before start working test your "proximity voltage
sensor" and circuit-testing device in a known
energized source.
•
Test your insulated gloves.
•
Prior to touch any equipment, a check must be
made with a "proximity voltage sensor", to ensure
that the frame and/or electric control enclosures of
the equipment you are going to work are not
energized
•
In the beginning treat every device to be alive ,you
never know.
Lockout and Tagout (LO/TO)
2
•
Identify & shut down all the energy sources that
power the equipment
•
Lock and Tag all the energy sources. Be aware of
additional power sources.
•
All employees working on the equipment must lock
with their own personal locks & tags all sources of
energy.
•
Verify the absence of electrical current or
voltage with a circuit-testing device; use
insulated gloves and an insulated mat.
•
Release stored energy if any (capacitors).
•
Perform the job and when finishes notify affected
persons of the return of electrical power.
ANNEXURE 2
Action
89
Ref. Tools/Equipment