Installation Steps; Dimensions - Danfoss ERC 21 Series User Manual

Electronic refrigeration control, type ERC 21X

Installation steps

• Place the wired controller in the slot and ensure rubber sealing is resting properly on the mounting surface.
• Slide the mounting clips along the rails of the rear plastic from the rear side of the panel.
• Slide the clips towards mounting surface until controller is firmly fixed.
• To remove the controller, one needs to skillfully unlatch the snapping tab and pull the clips backwards.

Dimensions

Figure 18: Dimensions (mm)
83
© Danfoss | Climate Solutions | 2023.01
61.2
66
Rear mounting (lock with clips)
71
29
Drilling template
BC194286421698en-000901 | 32