Installations; Dimensions (Mm); Mounting; Installation Steps - Danfoss ERC 211 User Manual

4|

Installations

4.1|

Dimensions (mm)

83
4.2|

Mounting

4.3|

Installation steps

– Place the wired controller in the slot and ensure rubber sealing is resting properly on the mounting surface.
– Slide the mounting clips along the rails of the rear plastic from the rear side of the panel.
– Slide the clips towards mounting surface until controller is firmly fixed.
– To remove the controller, one needs to skillfully unlatch the snapping tab and pull the clips backwards.
61.2
66
Rear mounting (lock with clips)
Mounting
FR · ERC 21X user manual · DKRCC.ES.RL0.H3.02/520H9656 · ©Danfoss
71
29
Drilling template
Unmounting
11