Light Sky SHARK LASER User Manual page 4

■ Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state is 60℃.
■ Maintenance
Before starting any maintenance work or cleaning the luminaire, the power supply to the luminaire must
be disconnected.
After the power is cut off, in order to avoid burns, do not disassemble any part of the lamp within 15 minutes.
■ Light
The light source in this luminaire should be replaced by the manufacturer or its service agent
or by a similarly qualified person;
Always cut of f the power before replacing the light source.
When the lamp is projecting an object, the minimum distance from the light outlet of the lamp to the surface
of the illuminated object is 25 meters
Protection against explosion
The protection screen, lens or ultraviolet screen on the lamp can be damaged to the degree
of failure if visible damage, such as a crack or deep mark, should be replaced.
Protection optical radiation
Please do not look at the light source, it may cause blindness due to damage to the retina of the eye.
It is forbidden to look directly at the exposed light source to avoid UV damage to the eyes.
The product implementation standard：GB 7000.1-2015
The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
-3-
GB7000.217-2008
www.lightsky.com.cn