MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 64

(7) Lower feed unit (second through fourth paper cassettes): paper feed retry control
• If the paper feed operation has already begun, but the paper take-up roller was not able to pick up
the paper, instead of concluding that a paper misfeed has occurred, the paper feed operation is per-
formed again (paper feed retry function).
• If the second attempt of the paper feed operation (first paper feed retry) fails, the paper feed oper-
ation is performed one more time.
• If no paper was fed and the paper sensor of the image transfer section (PC1) could not detect the
leading edge of the paper during the third attempt of the paper feed operation (second paper feed
retry), the printer concludes that a paper misfeed has occurred.
• The paper feed operation is attempted three times, including the initial attempt.
Initial paper
feed operation
Paper feed retries
56