MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 108

Note
• When installing a paper-lifting plate, as with removing it, insert a flat screwdriver between the
paper-lifting plate and the frame of the paper tray, stretch the frame of the tray, and then install
the paper-lifting plate assembly.
• When installing a paper-lifting plate, make sure that the end of the compression coil spring at the
bottom of the paper-lifting plate is hooked onto the bracket as shown in the illustration.
1
1 Compression coil spring
2 Paper-lifting plate
• When installing a paper-lifting plate, make sure that the compression coil spring at the bottom of
the paper-lifting plate fits into the corresponding spring seat in the paper cassette frame.
1 Compression coil spring
1
1
100
2