MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 188

PREFACE
1. The part numbers listed in this Parts List are those which were assigned to the parts making up the machine at the time machine was originally introduced onto the mar-
ket.
2. Parts whose INDEX numbers are shown white against a black background in the illustration are those to be used in only certain market areas. These part numbers are
given in the lower half part of the list section. Check the SFIX No. listed in SFIX CHART to find which part number is applicable to your own area.
3. Parts whose INDEX numbers are shown black against a white background in the illustration are those to be used in all market areas. These parts are listed on the upper
half part of the list section.
4. If "NS" follows a part number given in the list section, it indicates that we do not keep a stock of the part. The part is not required for ordinary service jobs, either.
5. If "RP" is shown in the REC column of the list section, it indicates that the part is functionally important.
6. In the exploded views in this Parts List the parts (Screws & Washes, etc...) which are indicated with a "four-digit" numbers are listed in numerical order in the section
"SCREWS AND WASHERS". Please check these "four-digit" numbers with the part numbers ("ten-digit" numbers) which should be used for ordering the part.
7. All part numberslisted in this Parts List consist of ten digits. However, you must add the special MINOLTA-QMS " 831" prefix to the beginning of the part
number when ordering a part. The price of parts can be obtained by referring to the "Parts Price List" which is separately issued.
8. All infomation contained in this Parts List is subject to change.
180
Parts List