MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 10

3. Use the specified parts
.
• For replacement parts, always use the genuine parts specified in the manufacturer's
parts manual. Installing a wrong or unauthorized part could cause dielectric breakdown,
overload, or undermine safety devices, resulting in possible electrical shock or fire.
• Replace a blown electrical fuse or thermal fuse with its corresponding genuine part
specified in the manufacturer's parts manual. Installing a fuse of a different make or rat-
ing could lead to a possible fire. If a thermal fuse blows frequently, the temperature con-
trol system may have a problem and action must be taken to eliminate the cause of the
problem.
4. Handle the power cord with care and never use a multiple outlet.
• Do not break, crush or otherwise damage the power cord. Placing a heavy object on the
power cord, or pulling or bending it may damage it, resulting in a possible fire or electri-
cal shock.
• Do not use a multiple outlet to which any other appliance or machine is connected.
• Be sure the power outlet meets or exceeds the specified capacity.
5. Be careful with the high-voltage parts.
• A part marked with the symbol shown on the left carries a high voltage. Touching it
could result in an electrical shock or burn. Be sure to unplug the power cord before ser-
vicing this part or the parts near it.
6. Do not work with wet hands.
• Do not unplug or plug in the power cord, or perform any kind of service or inspection
with wet hands. Doing so could result in an electrical shock.
7. Do not touch a high-temperature part.
• A part marked with the symbol shown on the left and other parts such as the exposure
lamp and fusing roller can be very hot while the machine is energized. Touching them
may result in a burn.
• Wait until these parts have cooled down before replacing them or any surrounding parts.
8. Maintain a grounded connection at all times. (This item may not apply in the USA.)
• Be sure to connect the ground wire to the ground terminal even when performing an
inspection or repair. Without proper grounding, electrical leakage could result in an
electrical shock or fire.
• Never connect the ground wire to a gas pipe, water pipe, telephone ground wire, or a
lightning conductor.
2