MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 114

8. Remove the stopper.
9. Remove the bushing.
10. Remove the paper take-up roller drive shaft from the frame of the cassette.
11. Remove the stopper.
12. Remove the paper take-up roller.
1 Paper take-up roller drive shaft
2 Paper take-up roller
3 Stopper
4 Bushing
Note
• Never touch the surface of the paper take-up roller or allow it to become contaminated with chem-
icals or toner, etc. Any scratching or contamination of the paper take-up roller will affect paper
feeding.
• When installing a paper take-up roller, make sure that the projection on the drum fits into the
notch in the paper take-up roller, and that the roller is secured with the stoppers.
1
Drum
106
2
Paper take-up roller
Projection/notch
3
4