MINOLTA-QMS PagePro 9100 Series Quick Start Manual page 13

4. Precautions for Handling Batteries (Lithium, Nickel-Cadmium, etc.)
• Replace a rundown battery with the same type as specified in the manufacturer's parts
manual.
• Before installing a new battery, make sure of the correct polarity of the installation or
the battery could burst.
• Dispose of used batteries according to the local regulations. Never dispose of them at
the user's premises or attempt to try to discharge one.
5. Precautions for the Laser Beam (Only for Products Employing a Laser)
• Removing the cover marked with the following caution label could lead to possible
exposure to the laser beam, resulting in eye damage or blindness. Be sure to unplug the
power cord before removing this cover.
• If removing this cover while the power is ON is unavoidable, be sure to wear protective
laser goggles that meet specifications.
• Make sure that no one enters the room when the machine is in this condition.
• When handling the laser unit, observe the "Precautions for Handling Laser Equipment."
5
1