Installation and testing
This section describes how to install and test Lifeline Digital.
Installing Lifeline Digital
Remove and replace the back cover
Note
Only remove the back cover for installation. The back cover protects the device from tampering.
To remove and replace the back cover:
1.
Push and slide out the back cover to remove it (1).
2.
Run all cables through the cable slot (2).
3.
Replace the back cover when installation is completed (3).
Connect to mains power
Caution
Only use power adapters supplied by Tunstall.
1.
Insert the power adaptor cable into the 12V connector on the device (1).
2.
Connect the mains power adaptor into a wall socket (2).