Page 2
Back view (Diagram 2) The Liberty300 home unit offers three connection options, via the mobile 3G GSM network, a traditional telephone line, and/or both. It enables you to generate a call for help by immediately contacting the Customer Care centre, where the Customer Care Consultant will be able to provide you with the assistance you require.
Step 2 - GSM connection: (SIM card required) Getting started If your alarm has been provided with a SIM already installed, please skip to Before you start using your Tunstall Liberty alarm, please complete the Step 3. following instructions. SIM card selection...
Page 4
GSM signal in order to operate efficiently. To obtain test call to the Tunstall customer care centre. Advise the consultant that you are this, attach the short stub antenna to the Gold GSM antenna port at rear of the installing your new Tunstall Liberty alarm.
Page 5
False alarms If you accidentally raise a false alarm, please do not worry, Tunstall’s customer care centre is always happy to hear from you and the raising of the alarm call acts as a useful test of your alarm unit.
Help and advice Technical Details Weight: 590g (including battery) Dimensions: 286 x 174 x 38 mm (LxWxD) Do’s Mains power: 9V DC 300mA with integral earth • Do wear your pendant at all times. Stand-by battery: 4.8V 1600mAh rechargable Ni-MH Back-up time: 40 hours of stand-by operation • Do test your pendant and base alarm unit on a monthly basis with the...