Appendix A Testing Peripherals; Testing Activity Sensors - Tunstall Care@Home C7000 User's Installation Manual

Appendix A
The C7000 enables testing paired peripherals to ensure that all
components work properly.

Testing Activity Sensors

The C7000 responds with a voice message after each interaction with a
peripheral. If the C7000 does not respond, make a note and continue
testing.
To test the activity sensors:
1. Push a probe into the C7000's TEST pinhole, once or twice, until the
C7000 responds "Installation test starts".
2. Test the MGLSs:
a. Open and close the main door.
b. Open and close the refrigerator door.
3. Walk past each PIR.
4. Push a probe into the control panel's TEST pinhole until the C7000
responds, "Installation test ends".
Testing Peripherals
TEST button
page 23 of 32