Applicable Documents; Intended Use - OBO Bettermann isCon PR 90 SW Mounting Instructions

Intended use

1 5
2
6 | DE
– DIN EN 62305-3 ED 2(IEC 62305-3, VDE 0185-305-3),
Protection against lightning ‒ Part 3: Protection of structural facilities
and persons
– DIN EN 62305-4 ED 2 (IEC 62305-4, VDE 0185-305-4),
Protection against lightning ‒ Part 4: Electrical and electronic systems
within structures.
– DIN EN 62561-1 ED 2 (IEC 62561-1, VDE 0185-561-1),
Lightning protection system components – Part 1: Requirements for
connection components
– DIN EN 62561-2 ED2 (IEC 62561-2, VDE 0185-561-2),
Lightning protection system components – Part 2: Requirements for
conductors and earth electrodes
– DIN EN 62561-4 ED2 (IEC 62561-4, VDE 0185-561-4),
Lightning protection system components – Part 4: Requirements for
conductor fasteners
– DIN 18014, Foundation earth electrode
– VDE V 0185-561-8 (IEC TS 62561-8:1-2018), Lightning Protection
System Components (LPSC) – Part 8: Requirements for components
for isolated LPS
– DIN 18531-1, Waterproofing of roofs, balconies and walkways – Part
1: Non-utilised and utilised roofs – Requirements and principles for
execution and design
– IEC 60332-1-2, Tests on electric and optical fibre cables under fire
conditions – Part 1–2: Test for vertical flame propagation for a single
insulated wire or cable
* Date of standards: February 2022

Applicable documents

– For declarations of conformity, see
Intended use
The OBO isCon system is a lightning protection system for the external
®
lightning protection of buildings and systems, which, in the case of direct
lightning strikes, can arrest the lightning surge currents into the earth,
thus protecting the building, the system and people against the impacts
of the lightning strike, e.g. fires, mechanical building damage and lethal
impulse voltage/currents.
The lightning protection system is not designed for extreme weather
conditions, such as continuous hail, snow or sandstorms. Such weather
conditions can seriously reduce the lifespan of the isCon
The system is not designed for any other purpose than the one de-
scribed here. If the system is installed and used for another purpose, any
liability, warranty or damage claims shall be rendered null and void.
If you require information on the use of the OBO isCon
something other than under the conditions of use described here, please
speak to your OBO contact.
www.obo-bettermann.com
system.
®
system for
®
OBO Bettermann