Mounting variants
8 2
Note!
1
58 | DE
Metallic roof parapet
If there is a metallic roof parapet
nent of the lightning protection system, the isCon
connected to it using a suitable OBO connection component
The potential is connected to the protective equipotential bonding on the
air-termination rod via the potential connection clip
Alternatively, the potential can be connected at the tripod stand
provided that the potential connection clip
electrical connection between the black, weakly conductive layer or the
protective jacket of the isCon
The distance x (= separation distance s multiplied by two) between the
potential connection terminal
should be noted.
T he conductor type isCon BA 45 SW (Basic) can be routed with or
without potential connection. If the conductor is routed without a potential
connection, observe "Mounting variant 2 for isCon BA 45 SW" on page
53.
2
x
6
5
®
Fig 62:
isCon
conductor connected to metallic parapet
which is used as a natural compo-
1
®
is mounted, creating the
3
conductor and the air-termination rod.
®
and the rear connection element
5
3
4
conductor can be
.
2
(type 927 2 6-K).
3
,
4
6
OBO Bettermann