Conductor - OBO Bettermann isCon PR 90 SW Mounting Instructions

8 3
Note!
Mounting instructions isCon
Internal and external isCon
The mounting example shows the use of an isFang air-termination rod
with internal isCon

conductor

is connected.
2
W hen using the grey isCon
must be removed before connecting the potential connection (see "7.1.2
Stripping the grey external jacket (isCon Pro+ 75 GR)" on page 30).
The potential connection clip
order to create an electrical connection between the black, weakly con-
ductive layer or protective jacket of the external isCon
air-termination rod. The potential is connected here. The internal poten-
tial connection element then means that the internal isCon
also connected with the potential connection. Alternatively, the potential
can be connected at the air-termination rod stand
potential connection clip
2
Fig 63: Internal and external isCon
lightning protection system
®
conductor
®
conductor , to which a second, external isCon
®
1
conductor, the light grey external jacket
®
(type 927 2 6-K) must be mounted, in
3
is mounted.
3
3
4
®
conductor
Mounting variants
®
conductor and the
®
conductor is
®
, provided that the
4
1
59 | DE