Table of Contents
Advertisement
3
3 1
3 2
4
Mounting instructions isCon
Safety
General safety information
Observe the following general safety information:
– The work may only be carried out by lightning protection specialists
who have been trained for the installation of standard-conformant
lightning protection systems.
– If there is a lightning strike, lethal currents can flow through the light-
ning protection system. Never work on the elements of the lightning
protection system during a thunderstorm or if there is a risk of one.
– Lethal voltages can occur during the handling of electrical resources.
Never work on parts through which power is flowing. Wear suitable
protective clothing and comply with all the required safety guidelines.
– To install the OBO isCon
product range, as otherwise there is no guarantee that safe installa-
tion is possible.
– The production method means that metallic objects may have areas
with sharp edges. Wear suitable protective gloves to avoid cutting
injuries.
– When erecting systems for maintaining electrical functionality, take
the necessary fire protection regulations into account. These in-
structions do not mention any fire protection standards which are
to be complied with. The OBO fire protection guide (article number:
9134859) provides more information on this. The conductor system
and any possible fire insulation must be matched.
– Take the risk of flooding, local fire prevention measures, accident pre-
vention regulations and rescue routes at the location into account.
Personal protective equipment
List of personal protective equipment to be used:
Use hand protection
Wear safety shoes
Necessary tools
List of required tools:
– isCon stripper 2
– Cable knife
– Spanner
lightning protection system
®
system, use only components of the OBO
®
Safety
7 | DE
Advertisement
Table of Contents
