Installing The Potential Connection On The End Of The Iscon; Conductor - OBO Bettermann isCon PR 90 SW Mounting Instructions

Installing the isCon® system
7 8 2
Note!
50 | DE
Fig 50: Creating equipotential bonding on the air-termination rod with external isCon

conductor

Installing the potential connection on the end of the isCon

conductor
The black, weakly conductive layer of the isCon
included in the protective equipotential bonding of the building to be pro-
tected (see Fig. 51 on page 51 No.
minimum distance (x) is maintained between the connection element of
the isCon conductor
®
and the upstream potential connection terminal
3
surface discharge along the high-voltage-resistant isCon
W hen the isCon Basic 45 conductor is installed, there is no equipotential
bonding connection on the air-termination rod
potential connection on an insulated air-termination rod" on page 48).
927 2 6-K
). It is important that a specific
1
on the conductor carrying the lightning current
2
®
conductor must be
®
, in order to prevent
4
conductor.
®
5 (see "7.8.1 Installing the
OBO Bettermann
®