Installing the isCon® system
7 5 3
44 | DE
5. Position the air-termination rod stand on the concrete bases.
max. 5°
Fig 44:
Compensating for the roof slope
6. Determine the inclination of the tripod stand (depending on the slope
of the roof) using a spirit level.
7. Compensate for the inclination of the tripod stand using the hexagonal
height-compensation nuts (max. 5 degrees).
8. Tighten the lock nuts.
Fastening the air-termination rod in the tripod stand
Air-termination rod with internal isCon
Fig 45: Inserting the air-termination rod in the tripod stand
1. Insert the air-termination rod in the tripod stand from above.
conductor
®
OBO Bettermann