Programming The M-2000; Displays; Menu Selection Display; Numeric Entry Display - Badger Meter M Series Installation And Operation Manual

Programming the M-2000

The M-2000 amplifier comes preprogrammed from the factory. Typically, you will not need to do any additional programming.
However, to take advantage of special features, you can program the meter for your specific needs. If you will be
programming the meter, familiarize yourself with the M-2000 Function Buttons and follow the procedures outlined below.

Displays

There are two types of displays on the M-2000:
• Menu Selection
• Numeric Entry

Menu Selection Display

Menu selection displays will appear in the following format:
DISPLAY TITLE
>Menu Selection 1
Menu Selection 2
DIRECTIONS LINE
The top line shows the title of of the display screen. Below that are two visible menu selections. The bottom line provides
directions for user input.
Typically, a menu contains more options than will fit in the two, menu selection lines. Press the [↑] and [↓] buttons to scroll
the display text up and down one line at a time.When the arrow is pointed to your desired menu option, press [E] to select the
item and open its display.

Numeric Entry Display

Numeric entry displays will appear in the following format:
DISPLAY TITLE
Description Line
Numeric Value
DIRECTIONS LINE
The top line shows the title of of the display screen. The second line is a description of the value. The third line shows the
current value. The bottom line provides directions for user input.
4-11
Display format
Display format
Installation & Operation Manual
START MENU
>Exit this Menu
Main Menu
MORE: , ENTER:>
↑ ↓
Example menu
LOW FLOW CUTOFF
% of 300.000 GPM
2.00%
CHG: +,- NEXT:E
Example numeric entry display
Page 21