Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/products/stand v155c Tools Required: STAND- phillips screwdriver Pack Mount a ge Contents TV Desk M Desk Mount Mount...
Page 2
Assembly Steps Steps Step 2 (Continued) Step 1 Option B: STAND- Grommet Base Installation Place pole cap (C) onto pole (B). Step 2 Option A: STAND- “C” Clamp Clamp Installation Remove screw and plate from clamp (D) as shown in diagram. Apply rubber pads (H) to the bottom of grommet base (G) as shown in diagram.
Page 3
Step 4 (Conti (Continued) Step 3 Option B: STAND- Curved Back Mount Monitor If installing a TV with a VESA 300x300mm or 400x400mm Attach VESA plate pattern, attach arm (L, M) to (A) to back of TV VESA plate (A) with screws (N) using screws (M-C, as shown in diagram.
Page 4
If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Manage cables using cable clip (E). Adjust tilt and swivel of TV.
Need help?
Do you have a question about the STAND-V155C and is the answer not in the manual?
Questions and answers