Turning On The Av Receiver; Turning On And Standby - Onkyo TX-SR703 Instruction Manual

TX-SR803_En.book Page 39 Friday, August 26, 2005 9:26 AM

Turning On the AV Receiver

• North American and
Australian models
STANDBY/ON
STANDBY indicator
STANDBY/ON
STANDBY
ZONE 2
PURE AUDIO MULTI CH DVD VIDEO 1

Turning On and Standby

1
POWER
ON OFF
2
Remote
AV receiver
controller
STANDBY/ON
RECEIVER
or
ON
For models other than the American and Australian models:
• To completely shut down the AV receiver, set the [POWER] switch to the OFF position ( ).
Smooth Operation in a Few Easy Steps
To ensure smooth operation, here's a few easy steps to help you configure the AV receiver before you use it for the
very first time. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See "Automatic Speaker Setup" on page 40.
■ Have you connected a component to an HDMI input,
component video input, or digital audio input?
If you have, see "HDMI Video Setup (TX-SR803/803E Only)" on
page 43, "Component Video Setup" on page 44, or "Digital Audio
Input Setup" on page 45 respectively.
■ Have you connected an Onkyo MD recorder, CD recorder, or
next generation HDD-compatible component?
If you have, see "Changing the Input Display" on page 46.
• Other models
STANDBY/ON
STANDBY indicator
STANDBY/ON
STANDBY
ZONE 2
POWER
ON OFF
PURE AUDIO MULTI CH DVD VIDEO 1
POWER
Set the [POWER] switch to the ON position ( ).
(Skip this step if you have the American or Australian model.)
The AV receiver enters Standby mode, and the STANDBY indicator comes on.
Press the [STANDBY/ON] button.
Alternatively, press the remote controller's [RECEIVER] button, followed
by the [ON] button.
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
Pressing the remote controller's [ON] button again will turn on any components con-
nected via .
To turn the AV receiver off, press the [STANDBY/ON] button, or press the remote
controller's [STANDBY] button. The AV receiver will enter Standby mode. To prevent
any loud surprises when you turn on the AV receiver, always turn down the volume
before you turn it off.
STANDBY
ON STANDBY
T V
ON
I INPUT
V1 V2 V3
1 2 3
V4 MULTI CH DVD T V CH
4 5 6
CD TAPE TUNER
7 8 9
T V VOL
PHONO
+ 10
0 CLEAR
10 11 12
- - / - --
INPUT SELECTOR
MACRO
1 2 3 ZONE2
REMOTE MODE
RECEIVER
RECEIVER DVD CD HDD
TAPE/AMP
TV VCR CABLE
CDR
DIMMER
Y
HDMI
COAXIAL
P
B
P
R
OPTICAL
OUT IN
CD recorder, MD recorder,
TAPE
RI Dock, etc.
+
-
SAT
MD
SLEEP
39