Listening To The Radio; Listening To Am/Fm Stations - Onkyo TX-SR703 Instruction Manual

TX-SR803_En.book Page 49 Friday, August 26, 2005 9:26 AM

Listening to the Radio

Listening to AM/FM Stations

TUNING MODE
STANDBY/ON
STANDBY
ZONE 2
POWER
ON OFF
PURE AUDIO MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3
PHONES TUNING
ZONE 2 OFF TONE STEREO DIMMER MEMORY MODE
LISTENING MODE CLEAR
ZONE 2 LEVEL
With the built-in tuner, you can enjoy AM and FM radio
stations, and store your favorite stations as presets for
easy selection.
1
Use the [TUNER] input selector
TUNER
button to select AM or FM.
In this example, FM has been selected.
Band
(Actual display depends on country.)
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1 Press the [TUNING MODE] button
TUNING
MODE so that the AUTO indicator
appears on the display.
2 Press the TUNING Up or Down
[ ]/[ ] button.
Searching stops when a station is
found.
TUNING
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
TUNING
MASTER VOLUME
VIDEO 4 PHONO TAPE TUNER CD DISPLAY
VIDEO 4 INPUT
ENTER SETUP MIC
SETUP RETURN
PRESET PRESET
TUNING DIGITAL S VIDEO VIDEO L AUDIO R
TUNER
Frequency
TUNED AUTO
FM STEREO
■ Manual Tuning Mode
1 Press the [TUNING MODE] button
TUNING
MODE so that the AUTO indicator disap-
pears from the display.
2
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
TUNING
Press the buttons repeatedly to change
the frequency one step at a time.
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Displaying AM/FM Radio Information
STANDBY/ON
STANDBY
ZONE 2
POWER
ON OFF
PURE AUDIO MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PHONO
1 Press the [DISPLAY] button
DISPLAY
repeatedly to cycle through the
available information.
Band, frequency,
and preset #
Listening mode
1
MASTER VOLUME
TAPE TUNER CD DISPLAY
PUSH TO OPEN
49