Download  Print this page

Onkyo TX-SR600 Instruction Manual

Onkyo av receiver tx-sr700 tx-sr600 user guide
Hide thumbs

Advertisement

AV Receiver
TX-SR700
TX-SR600

Instruction Manual

Thank you for purchasing the Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment from
your new AV Receiver. Please retain this manual for
future reference.
Contents
Before using
Facilities and connections
Setup and operation
Remote controller
Appendix
2
8
36
63
76

Advertisement

Table of Contents
loading

  Related Manuals for Onkyo TX-SR600

  Summary of Contents for Onkyo TX-SR600

  • Page 1: Instruction Manual

    AV Receiver TX-SR700 TX-SR600 Instruction Manual Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
  • Page 2: Before Using Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3: Precautions

    2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station. 3. Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth.
  • Page 4: Table Of Contents

    When using the ZONE 2 SPEAKERS terminals ... 23 When using the ZONE 2 PRE OUT terminals ... 23 AC OUTLETS ... 29 REMOTE CONTROL ... 29 Connections (TX-SR600/600E) ... 24 Connecting your audio components ... 24 Connecting your video components ... 25 AC OUTLETS ... 29 REMOTE CONTROL ...
  • Page 5 We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GERMERING, GERMANY ONKYO EUROPE ELECTRONICS GmbH I.
  • Page 6: Features

    LEDs I 12V Trigger output for Zone 2 I IR input terminal TX-SR600/600E Amplifier Features I 80 W × 2 (Front)/ 80 W (Center)/ 80 W × 2 (Surround)/ 80 W (Surround Back) at 8 ohms, 20 Hz - 20 kHz, 0.08 % THD (FTC rated)
  • Page 7: Supplied Accessories

    Check that the following accessories are supplied with the TX-SR700/700E/600/600E. AM loop antenna × 1 Remote controller × 1 TX-SR700/700E: RC-482M TX-SR600/600E: RC-480M Batteries (AA, R6 or UM-3) × 2 Before using this unit Setting the voltage selector (Worldwide models only)
  • Page 8: Front Panel Facilities

    Front panel facilities Here is an explanation of the controls and displays on the front panel of the TX-SR700E/600E. Front panel <TX-SR700E> <TX-SR600E>...
  • Page 9 Press to display the screen for the item that is selected in the Setup Menu. MASTER VOLUME dial [44, 45] TX-SR600/600E: Use to control the volume. TX-SR700/700E: Use to control the volume in the main zone. The volume for the remote zone (Zone 2) is independent.
  • Page 10 When REC OUT is selected, nothing is output to Zone 2. When ZONE 2 is selected, REC OUT is automatically fixed to SOURCE. SPEAKERS A/B buttons (TX-SR600/600E only) [45] Press these buttons to turn on and off speakers systems A and B. buttons, and...
  • Page 11: Front Panel Display

    ZONE 2 indicator (TX-SR700/700E only) Lights when using the remote zone (Zone 2). REC OUT indicator (TX-SR700/700E only) Lights when recording the input source from one component to another (Rec Out). SPEAKERS A/B indicators (TX-SR600/600E only) Indicates which speaker system is currently in use.
  • Page 12: Remote Controller

    Press the ANGLE button to select a camera angle when playing a DVD-Video with multiple angle playback. Press the SUBTITLE button to select a subtitle language when playing a DVD-Video. [65] CD/TAPE/DVD/MD operation buttons [63-66] Press to operate other Onkyo components connected to the TX- SR700/700E/600/600E using the terminals. /SUBTITLE buttons...
  • Page 13 DVD where you want to start playback (SEARCH). [65] When in the RCVR mode, press to perform operations on the remote zone (ZONE 2) (not used with the TX-SR600/600E). [60] When in the MD mode, press to enter the selected song (ENTER). [66]...
  • Page 14: Connections

    Connections • Be sure to always refer to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been properly made. • For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.
  • Page 15 DIGITAL INPUT SUBWOOFER PRE OUT TAPE VIDEO 3 VIDEO 2 VIDEO 1 Connecting a subwoofer [31] Connecting your video components [17] TX-SR600/600E Connecting your audio components [24] Connecting antennas [34] ANTENNA DIGITAL INPUT DIGITAL DIGITAL VIDEO 3 VIDEO 2 OUTPUT...
  • Page 16: Connections (Tx-Sr700/700E)

    Connections Here is an explanation of typical ways to connect various components to the TX-SR700/700E. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such.
  • Page 17: Connecting Your Video Components

    Connections (TX-SR700/700E) Connecting a DVD Player with 5.1-Channel Output ANTENNA DIGITAL INPUT DIGITAL COAXIAL OUTPUT OPTICAL OPTICAL COAXIAL DIGITAL INPUT SUBWOOFER PRE OUT TAPE : Signal flow Connecting your video components Below is an example of how you can connect your video components to the TX-SR700/700E.
  • Page 18 Connections (TX-SR700/700E) Connecting a DVD Player with 2-Channel (L/R) Audio Output ANTENNA DIGITAL INPUT DIGITAL OUTPUT OPTICAL OPTICAL SUBWOOFER PRE OUT : Signal flow 4. Connecting a DVD player (DVD) Using an RCA video cable, connect the video output jack (composite) of the DVD player to the DVD VIDEO IN jack of the TX-SR700/ 700E.
  • Page 19 Connections (TX-SR700/700E) : Signal flow 6. Satellite tuner or television (VIDEO 3) Digital audio output (optical) Video output S Video output L (white) Analog audio output R (red) 5. Connecting a video cassette recorder (VIDEO 1) Using RCA video cables, connect the video output jack (composite) of the video cassette recorder to the VIDEO 1 VIDEO IN jack of the TX-SR700/700E and connect the video input jack of the video cassette recorder to the VIDEO 1 VIDEO OUT jack of the TX-...
  • Page 20 Connections (TX-SR700/700E) Video output S Video output Video input S Video input 7. DVD recorder, other digital video recording device (VIDEO 2) L (white) Analog audio input R (red) L (white) Analog audio output R (red) 7. Connecting a DVD recorder or other digital video recording device (VIDEO 2) Using RCA video cables, connect the video output jack (composite) of the device to the VIDEO 2 VIDEO IN jack of the TX-SR700/...
  • Page 21: 12V Trigger Zone 2 Terminal

    Connections (TX-SR700/700E) 9. Connecting video camera, etc. (VIDEO 4 INPUT) Using an RCA video cable, connect the video output jack (composite) of the device to the VIDEO 4 VIDEO jack of the TX- SR700/700E. Or if the device has an S video output jack, connect it to the VIDEO 4 S VIDEO jack of the TX-SR700/700E using an S video cable.
  • Page 22: Operating Components Not Reached By The Remote Controller Signals (Ir In)

    700E from a remote location, you will need to prepare a multi- room kit (sold separately) such as one of those given below: • Onkyo’s Multi-Room System kit (IR Remote Controller Extension System) • Multiroom A/V distribution and control system such as those from Niles ®...
  • Page 23: Connecting The Remote Zone (Zone 2) Speakers

    Connecting the remote zone (Zone 2) speakers (TX-SR700/700E only) The TX-SR700/700E allows you to listen to two separate input sources at the same time. This allows you to, for example, place speakers in two different rooms so that two or more people can enjoy two different kinds of music at the same time.
  • Page 24: Connections (Tx-Sr600/600E)

    Connections Here is an explanation of typical ways to connect various components to the TX-SR600/600E. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such.
  • Page 25: Connecting Your Video Components

    : Signal flow Connecting your video components Below is an example of how you can connect your video components to the TX-SR600/600E. Refer to the diagram above for the following connection examples. COMPONENT VIDEO INPUT/OUTPUT For DVD players or other devices that have component video...
  • Page 26 3. Connecting a DVD player (DVD) Using an RCA video cable, connect the video output jack (composite) of the DVD player to the DVD VIDEO IN jack of the TX-SR600/ 600E. Or if the DVD player has an S video output jack, connect it to the DVD S VIDEO IN jack with an S video cable.
  • Page 27 TX-SR600/600E. Or if the device has an S video output jack, connect it to the VIDEO 2 (or 3) S VIDEO IN jack of the TX-SR600/ 600E using an S video cable. Or if the device has component video outputs, connect them to the COMPONENT VIDEO INPUT 1 or 2 jacks on the TX-SR600/600E.
  • Page 28 (composite) of the device to the VIDEO 4 VIDEO jack of the TX- SR600/600E. Or if the device has an S video output jack, connect it to the VIDEO 4 S VIDEO jack of the TX-SR600/600E using an S video cable.
  • Page 29: Ac Outlets

    TX-SR700/700E/600/600E. The other one can be used to daisy chain with another component. • With Onkyo DVD players, you can enter the pre-program code so that you can operate the DVD player directly with the remote controller without connecting the...
  • Page 30: Connecting Speakers

    Connecting speakers Before connecting the speakers, it is very important to place them properly for the optimum sound space for your listening pleasure. Be sure to refer to the instruction manuals that came with the speakers during placement and connection. Furthermore, be aware that for surround playback, the configuration and placement of your speakers are both very important.
  • Page 31: Connecting Speakers

    3. Unscrew the speaker terminal cap. 4. Insert the exposed wire end. 5. Screw down the speaker terminal cap. SPEAKER B (TX-SR600/600E only) 1. Strip away approx. 3/8 inch (10 mm) of the wire insulation. 2. Twist the wire ends tightly together.
  • Page 32 VIDEO 2 COAXIAL OUTPUT OPTICAL OPTICAL COAXIAL DIGITAL INPUT SUBWOOFER PRE OUT TAPE VIDEO 3 VIDEO 2 VIDEO 1 Subwoofer TX-SR600/600E Front right A speaker ANTENNA VIDEO 3 VIDEO 2 DIGITAL INPUT DIGITAL DIGITAL VIDEO 1 OUTPUT INPUT OPTICAL OPTICAL...
  • Page 33: Connecting The Power

    Connecting the power Diagram for TX-SR700/700E (USA and Canadian models) STANDBY/ON STANDBY indicator To wall outlet • Before you plug in the TX-SR700/700E/600/600E, confirm that all connections have been made properly. • Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers.
  • Page 34: Connecting Antennas

    Connecting antennas To use the tuner of the TX-SR700/700E/600/600E, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.
  • Page 35: Connecting An Fm Outdoor Antenna

    Connecting antennas Connecting an FM outdoor antenna Make sure to follow the general rules given below: • Keep the antenna away from noise sources (neon signs, busy roads, etc.). • It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.
  • Page 36: Configuring The Speakers

    Configuring the speakers To create the optimum sound space for both visual and audio pleasure, it is necessary to set the size of the speakers and their distance from your normal listening position. Once made, you will not need to change these settings unless you change the speaker configuration or positions.
  • Page 37 Configuring the speakers 4. Use the cursor buttons to select “Subwoofer” and then use the cursor buttons to select the subwoofer setting. Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. TX-SR700/700E/600/600E Remote controller 5.
  • Page 38: Setting The Speaker Distance From Your Normal Listening Position

    Configuring the speakers Setting the speaker distance from your normal listening position Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in 1-foot (0.3 meter) increments. Select the setting closest to the actual distance from the speaker to your normal listening position. Note: Speakers that you selected “No”...
  • Page 39: Buttons Used For Navigating Through The Menus

    Configuring the speakers (1) Remember the volume level of this noise and then press the cursor button. The TX-SR700/700E/600/600E will now emit the pink noise from the center speaker. (2) Using the cursor buttons, adjust the volume level of the noise from the center speaker so that it is at the same level as that that was emitted from the front left speaker.
  • Page 40: Listening To Radio Broadcasts

    Listening to Radio Broadcasts One of the features of the TX-SR700/700E/600/600E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-SR700/700E/600/600E provides a number of listening modes perfect for listening to the radio and getting the most out of your audio system.
  • Page 41: Presetting A Radio Station

    Listening to Radio Broadcasts MEMORY TUNER Presetting a radio station 1. Tune into the radio station you desire (see “Tuning into a radio station”). 2. Press the MEMORY button on the front panel. The MEMORY indicator lights red. “MEMORY” (Lights red) TUNED MEMORY 3.
  • Page 42: Listening To Rds Broadcasts (European Models Only)

    Listening to RDS broadcasts Listening to RDS broadcasts RDS reception is available only on the European model and only in areas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting. RDS was developed within the European Broadcasting Union (EBU) and is available in most European countries.
  • Page 43: Displaying Radio Text (Rt)

    Listening to RDS broadcasts Displaying Radio Text (RT) If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display of the TX-SR700E/600E. If the station does not, this function will be ignored. 1.
  • Page 44: Selecting An Audio Component

    Selecting an Audio Component TX-SR700/700E Input source buttons Basic operation (TX-SR700/700E) If you want to perform these operations using the remote controller, first press the RCVR MODE button. 1. Press the desired input source. TX-SR700/700E Remote controller The selected source name appears on the display. See “Enjoying the multichannel output”...
  • Page 45: Basic Operation (Tx-Sr600/600E)

    Remote controller The selected source name appears on the display. See “Enjoying the multichannel output” (see page 47) when a DVD player with a 5.1-channel input port is connected to the TX-SR600/600E. 2. Make sure that the SPEAKERS A indicator ( ) is lit on the display.
  • Page 46: Selecting The Type Of Audio Input Signal

    TAPE to MD If you connected an MD recorder to the TAPE jacks of the TX- SR700/700E/600/600E, you can have “MD” appear when the TAPE source button is pressed. By changing the display, when an Onkyo MD recorder is enabled.
  • Page 47: Using The Sleep Time (Remote Controller Only)

    Selecting an Audio Component PHONES AUDIO SELECTOR Using the sleep time (remote controller only) The SLEEP button enables you to set the TX-SR700/700E/600/ 600E to turn off automatically after a specified time period. If you press it once, the TX-SR700/700E/600/600E will turn off after 90 minutes.
  • Page 48: Switching The Display

    Selecting an Audio Component Using the tone control: To make bass and treble adjustment work for multichannel sources, you must first set the tone control to “On.” To turn on the tone control: 1. Press the SURROUND button (or SURR button on the remote controller).
  • Page 49: Listening Modes

    Listening Modes The TX-SR700/700E/600/600E’s surround sound enables you to enjoy the presence of a movie theater or concert hall in your room. The configuration of the speakers is very important for the surround sound. Refer to “Connecting speakers” on page 30. Before using a listening mode, make sure the Speaker Config, Speaker Distance, and Level Calibration parameters have been set (see pages 36 to 39) .
  • Page 50 Listening Modes Orchestra This mode is appropriate for classical and opera music. The center channel is cut and the surround channels are emphasized to widen the stereo image. It will simulate the natural reverberation that is created in large halls. Unplugged This mode is suitable for acoustical instrumental sounds, vocals, and jazz music.
  • Page 51: Selecting A Listening Mode

    Listening Modes Listening mode buttons Selecting a listening mode • Refer to page 49 for more details of listening modes. • Refer to page 55 for sources and listening modes. • When playing Dolby Digital or DTS software, the listening mode will automatically change to Dolby Digital or DTS.
  • Page 52: Original Filter (Cinemafilter) Loading For Movies

    Listening Modes ALL ST (remote controller only): Changes the listening mode for the signal type that is currently being input from the selected input source to the All Ch Stereo listening mode. If pressed, the corresponding setting in the “Input Setup” menu for the selected input source is also changed (see page 54).
  • Page 53: Input Setup

    Input Setup Input source buttons This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the TX-SR700/700E/600/600E. The settings made in this menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each input source.
  • Page 54 Input Setup b. Digital Format Sets the digital signal type to which priority is given during signal detection at the selected digital terminal. The default setting is “All.” If “----” is selected for this input source at the Digital Input setting, then this setting will not appear.
  • Page 55 Input Setup f. Analog/PCM Source This sets the listening mode for analog or PCM sources. Analog sources consist of LP records, FM and AM broadcasts, cassette tapes, and the such. PCM (Pulse Code Modulation) is one form of digital audio signals and is recorded directly onto compact discs and DVDs without compression.
  • Page 56: Osd Setup And Other Settings

    However, if you know the correct format, you can use this setting to choose either PAL or NTSC so that no time is wasted on detection. d. OSD Output/ c. OSD Output (TX-SR600/600E only) Sets the OSD menu output. To display the Preference menu: 1.
  • Page 57: Audio Adjust

    Audio Adjust These settings are enabled depending on the listening mode or input signal. Setup Procedure 1. Press the AUDIO ADJUST button. The Audio Adjust settings appear in the front display and on the monitor. Bass Treble Note: The items that appear in the menu depend on the currently selected listening mode or the input signal.
  • Page 58 Audio Adjust Center Image DTS Neo:6 derives a center channel from two-channel PCM and analog sources. In cinema mode, for Lt/Rt film soundtracks, sounds steered to the center are subtracted from the left and right channels. In music mode, the intent in the front channels is less one of steering and more one of stabilizing the front image by augmenting it with a center channel, while preserving the original perspective of the stereo mix.
  • Page 59 Audio Adjust Settings possible for each listening mode Setting Tone Control (Bass, Treble Listening mode Direct Pure Audio Stereo Dolby Pro Logic II Dolby Digital Dolby Digital EX DTS Neo:6 DTS-ES Discrete DTS-ES Matrix Orchestra Unplugged Studio-Mix TV Logic All CH Stereo *1 Enabled for a Dolby Digital input source.
  • Page 60: Enjoying Music In The Remote Zone (Tx-Sr700/700E Only)

    Enjoying music in the remote zone ZONE 2 LEVEL / ZONE 2 indicator Using the buttons on the TX-SR700/700E 1. Press the ZONE 2 button on the TX-SR700/700E. 2. Select an input source. After pressing the ZONE 2 button, you must press an input source button within 5 seconds.
  • Page 61: Recording A Source (Tx-Sr700/700E)

    Recording a source REC OUT Notes: • You cannot record the surround effects. • Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be output to the DIGITAL OUTPUT (COAXIAL) and DIGITAL OUTPUT (OPTICAL) output. •...
  • Page 62: Recording A Source (Tx-Sr600/600E)

    (cassette tape deck, video deck, or MD recorder). 2. Select the input source to record by pressing the corresponding input source button. 3. Start the output source component and start recording at the recording component as desired. (TX-SR600/600E) Input source buttons...
  • Page 63: Using Remote Controller

    The RCVR MODE button lights green (RC-482M) or red (RC-480M). 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo cassette tape deck. Operation buttons: : Play...
  • Page 64: Controlling An Onkyo Cd Player

    STANDBY 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo compact disc player. Operation buttons: ON: Turns on and off the compact disc player (same as the...
  • Page 65: Controlling An Onkyo Dvd Player

    The DVD MODE button lights green (RC-482M) or red (RC-480M). 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo DVD player. Operation buttons: ON: Turns DVD player on and off STANDBY: Turns DVD player off (Some sets may not respond to this button.
  • Page 66: Controlling An Onkyo Md Recorder

    2. Press the desired operation button. STANDBY The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder. MD MODE Operation buttons: ON: Turns on and off MD player (same as the STANDBY button on...
  • Page 67: Entering A Pre-Programming Code

    First enter 601 and if it does not operate properly, enter 613. No. 600: This code is for Onkyo DVD players that have an terminal that you are connecting to the TX-SR700/700E/600/600E with an cable.
  • Page 68: Pre-Programming Codes

    (i.e. if the first code does not work, then try the next). BRAND SETTING No. DENON 602, 609 HITACHI KENWOOD MAGNAVOX 606, 613 MARANTZ MITSUBISHI 608, 613 ONKYO 600, 601, 613 PANASONIC PIONEER PROSCAN SONY TOSHIBA YAMAHA 609, 614 ZENITH 613, 615 BRAND SETTING No.
  • Page 69: Operating Your Programmed Remote Controller

    Operating your programmed remote controller After entering a pre-programming by following the procedure given above, the following modes become enabled for use. TV/VCR TV MODE TV/VCR DVD MODE (DVD Player Mode) Operations are the same as explained on page 65. VCR MODE (VCR Mode) 1.
  • Page 70: Programming The Commands Of Remote Controllers For Other Devices Into The Remote Controller

    Programming the commands of remote controllers for other devices into the remote controller 2 to 6 inches (5 to 15 cm ) Programming procedure When programming the commands of another remote controller to the RC-482M/480M remote controller, you must first decide under which MODE button you want the commands to be linked.
  • Page 71 You may, however, use these buttons to program the codes for other remote controllers. If you wish to restore the Onkyo preset codes after you program new codes, you must first erase the new codes (see page 72).
  • Page 72: Erasing The Programmed Command From One Button

    Programming the commands of remote controllers for other devices into the remote controller Erasing the programmed command from one button SEND/LEARN indicator You can only erase memorized commands and not preset ones. 1. Press and hold down the MODE button for the command, press the ENTER button, and then release both buttons.
  • Page 73: Using The Macro Function

    Using the macro function What is the macro function? A macro function enables you to program a series of button operations (up to 16) on the remote controller into a single button. The series of operations are then called a macro. For example, to play a compact disc player connected to the TX-SR700/700E/600/ 600E normally, you must perform the following steps: 1.
  • Page 74: Erasing A Macro From The Macro 1 (Or 2) Button

    Using the macro function MACRO 1 Erasing a macro from the MACRO 1 (or 2) button SEND/LEARN 1. Press and hold down any one of the six MODE indicator buttons, press the MACRO 1 (or 2) button, and then release both buttons. When you press the MODE button, it lights green (RC-482M) or red (RC-480M) and the SEND/LEARN indicator lights.
  • Page 75: Macro Mode Programming Memo

    Using the macro function Macro mode programming memo: MACRO MACRO 1 Operation 1 Operation 2 Operation 3 Operation 4 Operation 5 Operation 6 Operation 7 Operation 8 Operation 9 Operation 10 Operation 11 Operation 12 Operation 13 Operation 14 Operation 15 Operation 16 MACRO 2...
  • Page 76: Troubleshooting Guide

    © Turn off the power, wait five seconds, and then turn back on the power (see page 33). • Internal fuse is blown. © Contact your Onkyo Service Center. Power turns on but no sound. • “Muting” is displayed. © Press the MUTING button on the remote controller to turn off muting (see page 48).
  • Page 77: Video And Audio

    Troubleshooting guide Stereo indicator lights, but sound is distorted and stereo separation is bad. • Station is too strong. © Change to FM indoor antenna (see page 34). • Multiple reflection of the radio waves because of tall buildings or mountains. ©...
  • Page 78: If One Of The Messages Shown Below Appears

    Troubleshooting guide If one of the messages shown below appears “Not available with headphones use” Operation not allowed because headphones are plugged into the TX- SR700/700E/600/600E. “Not available with Multichannel use” Operation not allowed while the multi-channel output is being used. “Not available in this Sp Config”...
  • Page 79: Specifications (Tx-Sr700/700E)

    Specifications (TX-SR700/700E) AMPLIFIER SECTION Continuous average power output (FTC) 100 W per channel min. RMS at 8 Ω, All channels: 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 125 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.
  • Page 80: Specifications (Tx-Sr600/600E)

    Stereo: 23 µV (75 Ω DIN) Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com...

This manual is also suitable for:

Tx-sr700Sr600 - av receiverHt-sr700Tx-sr700eTx-sr600e