Onkyo TX-SR601E Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. TX-SR601E
  6. Instruction manual

Onkyo TX-SR601E Instruction Manual

Onkyo instruction manual av receiver tx-sr701/701e tx-sr601/601e
Hide thumbs Also See for TX-SR601E:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
AV Receiver
TX-SR701/701E
TX-SR601/601E
Instruction Manual
Thank you for purchasing the Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment from
your new AV Receiver. Please retain this manual for
future reference.
Contents
Before using
Facilities and connections
Setup and operation
Remote controller
Appendix
2
8
31
63
75
E
n

Advertisement

Table of Contents
loading

Related Manuals for Onkyo TX-SR601E

Summary of Contents for Onkyo TX-SR601E

  • Page 1 AV Receiver TX-SR701/701E TX-SR601/601E Instruction Manual Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.

  • Page 2: Important Safety Instructions

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • Page 3: Precautions

    2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station. 3. Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth.

  • Page 4: Table Of Contents

    Contents Before using Important Safety Instructions ... 2 Precautions ... 3 Contents ... 4 Features ... 6 Supplied accessories ... 7 Before using this unit ... 7 Setting the voltage selector (Worldwide models only) ... 7 Installing the remote controller batteries ... 7 Using the remote controller ...
  • Page 5 We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GERMERING, GERMANY ONKYO EUROPE ELECTRONICS GmbH I.

  • Page 6: Features

    “Dolby,” “Pro Logic,” “Surround EX” and the double-D symbol are trademarks of Dolby Laboratories. • “Theater-Dimensional” is a trademark of Onkyo Corporation. • Lucasfilm THX and THX are trademarks or registered trademarks of THX Ltd. All rights reserved. Used under authorization.

  • Page 7: Supplied Accessories

    Supplied accessories Check that the following accessories are supplied with the TX-SR701/701E/ 601/601E. AM loop antenna × 1 Remote controller × 1 TX-SR701/701E: RC-533M TX-SR601/601E: RC-515M Batteries (AA, R6) × 2 Before using this unit Setting the voltage selector (Worldwide models only) Worldwide models are equipped with a voltage selector so that you can set your TX-SR701/701E/601/601E to conform with local power supplies.

  • Page 8: Front Panel Facilities

    Here is an explanation of the controls and displays on the front panel of the TX-SR701/701E/601/601E. Front panel <TX-SR701E> STANDBY/ON POWER REC OUT ZONE LEVEL PHONES DIRECT/ PURE AUDIO PURE AUDIO <TX-SR601E> STANDBY/ON POWER REC OUT ZONE LEVEL PHONES STANDBY LISTENING MODE DISPLAY RT/PTY/TP STEREO...
  • Page 9 Front panel facilities For further operational instructions, see the pages indicated in brackets [ ]. POWER switch (for all models other than USA and Canadian models, and Australian models) [28] Press to turn on and off the main power supply for the TX-SR701/ 701E/601/601E.
  • Page 10 Front panel facilities Input source buttons (DVD, VIDEO 1–4, TAPE, TUNER, CD, and PHONO (TX-SR701/701E only)) [41] These buttons are used to select the input source. Press these buttons to select the input source for the main zone. To select the input source for the remote zone (Zone 2) or recording out (Rec Out), first press the ZONE 2 or REC OUT button, and then press the desired input source button.

  • Page 11: Front Panel Display

    Front panel facilities Front panel display MUTING indicator Flashes when the mute function is turned on. Listening mode or digital input format indicators One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights to indicate the current listening mode.

  • Page 12: Remote Controller

    Press the ANGLE button to select a camera angle when playing a DVD-Video with multiple angle playback. Press the SUBTITLE button to select a subtitle language when playing a DVD-Video. [64] CD/TAPE/DVD/MD operation buttons [63-66] Press to operate other Onkyo components connected to the TX- SR701/701E/601/601E using the terminals. /SUBTITLE buttons...
  • Page 13 Remote controller INPUT SELECTOR buttons [41] Press to select an input source. Same as the input selector buttons on the front panel of the TX- SR701/701E/601/601E. The input source for each button is given here. DVD:DVD, CD:CD, V1:VIDEO1, V3:VIDEO3, V4:VIDEO4, V5:VIDEO5 (not used with the TX- SR701/701E/601/601E), TAP:TAPE, TUN:FM/AM, PH:PHONO (not used with the TX-SR601/601E).

  • Page 14: Connections

    Connections • Be sure to always refer to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been properly made. • For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

  • Page 15: Tx-Sr701/701E

    Connections TX-SR701/701E When using Connecting antennas [29] the Zone 2 COMPONENT VIDEO LINE OUT INPUT/OUTPUT [18-20] terminals [23] ANTENNA FM 75 COMPONENT VIDEO INPUT 2 INPUT 1 OUTPUT DIGITAL VIDEO 1 VIDEO 3 VIDEO 2 COAXIAL OPTICAL OPTICAL COAXIAL PHONO TAPE VIDEO 3 VIDEO 2...

  • Page 16: Connecting Your Audio Components

    Connections Here is an explanation of typical ways to connect various components to the TX-SR701/701E/601/601E. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such.

  • Page 17: Connecting Your Video Components

    Connections Connecting a DVD Player with 5.1-Channel Output COMPONENT VIDEO INPUT 2 INPUT 1 OUTPUT DIGITAL COAXIAL OPTICAL OPTICAL COAXIAL PHONO TAPE : Signal flow Connecting your video components Below is an example of how you can connect your video components to the TX-SR701/701E/601/601E.
  • Page 18 Connections Connecting a DVD Player with 2-Channel (L/R) Audio Output COMPONENT VIDEO INPUT 2 INPUT 1 OUTPUT DIGITAL OPTICAL OPTICAL PHONO : Signal flow 4. Connecting a DVD player (DVD) Using an RCA video cable, connect the video output jack (composite) of the DVD player to the DVD V IN jack of the TX- SR701/701E/601/601E.
  • Page 19 Connections : Signal flow 6. Satellite tuner or television (VIDEO 3) Digital audio output (optical) Video output S Video output L (white) Analog audio output R (red) 5. Connecting a video cassette recorder (VIDEO 1) Using RCA video cables, connect the video output jack (composite) of the video cassette recorder to the VIDEO 1 V IN jack of the TX- SR701/701E/601/601E and connect the video input jack of the video cassette recorder to the VIDEO 1 V OUT jack of the TX-SR701/...
  • Page 20 Connections 7. DVD recorder, other digital video recording device (VIDEO 2) Digital audio input (coaxial) TX-SR701/701E only Video input S Video input L (white) Analog audio input R (red) L (white) Analog audio output R (red) S Video output Video output 7.

  • Page 21: 12V Trigger Zone 2 Terminal

    Connections 9. Connecting video camera, etc. (VIDEO 4 INPUT) Using an RCA video cable, connect the video output jack (composite) of the device to the VIDEO 4 VIDEO jack of the TX- SR701/701E/601/601E. Or if the device has an S video output jack, connect it to the VIDEO 4 S VIDEO jack of the TX-SR701/701E/ 601/601E using an S video cable.

  • Page 22: Operating Components Not Reached By The Remote Controller Signals (Ir In)

    701E/601/601E from a remote location, you will need to prepare a multi-room kit (sold separately) such as one of those given below: • Onkyo’s Multi-Room System kit (IR Remote Controller Extension System) • Multiroom A/V distribution and control system such as those ®...

  • Page 23: Connecting The Remote Zone (Zone 2) Speakers

    Connecting the remote zone (Zone 2) speakers The TX-SR701/701E/601/601E allows you to listen to two separate input sources at the same time. This allows you to, for example, place speakers in two different rooms so that two or more people can enjoy two different kinds of music at the same time.

  • Page 24: Connections

    TX-SR701/701E/601/601E. The other one can be used to daisy chain with another component. same • With Onkyo DVD players, you can enter the pre-program code so that you can operate the DVD player directly with the remote controller without connecting the -connected component, connection.

  • Page 25: Connecting Speakers

    Connecting speakers Before connecting the speakers, it is very important to place them properly for the optimum sound space for your listening pleasure. Be sure to refer to the instruction manuals that came with the speakers during placement and connection. Furthermore, be aware that for surround playback, the configuration and placement of your speakers are both very important.

  • Page 26: Using The Speaker Cable Labels

    Connecting speakers Using the speaker cable labels The positive speaker terminals on the TX-SR701/701E/601/601E are color coded for easy identification. Attach the supplied speaker labels to the speaker cables, and then match the colors on the speaker cables to the corresponding terminals. Speaker cable label TX-SR701/701E/ 601/601E...

  • Page 27: Connecting Speakers

    Connecting speakers Front right speaker ANTENNA FM 75 COMPONENT VIDEO INPUT 2 INPUT 1 OUTPUT DIGITAL VIDEO 2 VIDEO 1 VIDEO 3 COAXIAL OPTICAL OPTICAL COAXIAL PHONO TAPE VIDEO 3 VIDEO 2 VIDEO 1 Surround right speaker Connecting speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-SR701/ 701E/601/601E.

  • Page 28: Connecting The Power

    Connecting the power Diagram for TX-SR701/701E (USA and Canadian models and Australian models) STANDBY/ON STANDBY indicator STANDBY/ON STANDBY LISTENING MODE REC OUT ZONE LEVEL DISPLAY DIMMER STEREO SURROUND MEMORY FM MODE CLEAR PHONES DIRECT/ AUDIO VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PURE AUDIO SELECTOR...

  • Page 29: Connecting Antennas

    Connecting antennas To use the tuner of the TX-SR701/701E/601/601E, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.

  • Page 30: Connecting An Fm Outdoor Antenna

    Connecting antennas Connecting an FM outdoor antenna Make sure to follow the general rules given below: • Keep the antenna away from noise sources (neon signs, busy roads, etc.). • It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.

  • Page 31: Configuring The Speakers

    Configuring the speakers SETUP RETURN STANDBY/ON POWER STANDBY LISTENING MODE REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO SURROUND MEMORY PHONES DIRECT/ AUDIO VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PURE AUDIO SELECTOR TAPE TUNER PURE AUDIO VCR 1 VCR 2 To create the optimum sound space for both visual and audio pleasure, it is necessary to set the size of the speakers and their distance from your normal listening position.
  • Page 32 Configuring the speakers 4. Use the cursor buttons to select “Subwoofer” and then use the cursor buttons to select the subwoofer setting. Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. TX-SR701/701E/601/601E TUNI NG PRESET TUNI NG PRESET...

  • Page 33: Setting The Speaker Distance From Your Normal Listening Position

    Configuring the speakers Setting the speaker distance from your normal listening position Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in 1-foot (0.3 meter) increments. Select the setting closest to the actual distance from the speaker to your normal listening position. Note: Speakers that you selected “No”...

  • Page 34: Calibrating The Speaker Levels

    Configuring the speakers TX-SR601/601E 1. Use the cursor buttons to select “3. Speaker Distance” on the main menu and then press the ENTER button. The “Speaker Distance” menu appears. * Menu ***************** * Menu ***************** 1.Speaker Config 1.Hardware Config 3.Speaker Distance 2.Speaker Distance 2.Speaker Config ***********************...
  • Page 35 Configuring the speakers 2. Use the cursor buttons to select “Left.” (1) Remember the volume level of this noise and then press the cursor button. (Note that this can be adjusted to any level between –12 and +12 decibels in 1-decibel increments.

  • Page 36: Buttons Used For Navigating Through The Menus

    Configuring the speakers Using the remote controller 1. Press the TEST button. You will hear a pink noise which will be emitted from the front left speaker. (1) Remember the volume level of this noise and then press the CH SEL button.

  • Page 37: Listening To Radio Broadcasts

    Listening to Radio Broadcasts REC OUT One of the features of the TX-SR701/701E/601/601E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-SR701/701E/601/601E provides a number of listening modes perfect for listening to the radio and getting the most out of your audio system.

  • Page 38: Presetting A Radio Station

    Listening to Radio Broadcasts STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 PURE AUDIO VCR 1 Presetting a radio station 1. Tune into the radio station you desire (see “Tuning into a radio station”). 2.

  • Page 39: Listening To Rds Broadcasts (European Models Only)

    Listening to RDS broadcasts Listening to RDS broadcasts RDS reception is available only on the European model and only in areas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting.

  • Page 40: Displaying Radio Text (Rt)

    Listening to RDS broadcasts (European models only) Displaying Radio Text (RT) If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display of the TX- SR701E/601E. If the station does not, this function will be ignored. 1.

  • Page 41: Selecting An Audio Component

    Selecting an Audio Component TX-SR701/701E STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO SURROUND PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 VIDEO 2 VIDEO 3 PURE AUDIO VCR 1 VCR 2 Input source buttons Basic operation If you want to perform these operations using the remote controller, first press the RCVR MODE button.

  • Page 42: Selecting The Type Of Audio Input Signal

    Selecting an Audio Component STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 VIDEO 2 VIDEO 3 PURE AUDIO VCR 1 VCR 2 AUDIO SELECTOR Selecting the type of audio input signal Press the AUDIO SELECTOR button on the front panel (or AUDIO SEL button on the remote controller) to change the audio mode.

  • Page 43: Temporarily Changing The Speaker Output Levels

    TAPE to MD If you connected an MD recorder to the TAPE jacks of the TX- SR701/701E/601/601E, you can have “MD” appear when the TAPE source button is pressed. By changing the display, when an Onkyo MD recorder is -connected, the become enabled.

  • Page 44: Using The Sleep Time (Remote Controller Only)

    Selecting an Audio Component STANDBY/ON STANDBY/ON POWER POWER STANDBY STANDBY LISTENING MODE LISTENING MODE REC OUT REC OUT ZONE ZONE LEVEL LEVEL DISPLAY DISPLAY RT/PTY/TP RT/PTY/TP STEREO STEREO SURROUND SURROUND PHONES PHONES DIRECT/ DIRECT/ AUDIO AUDIO PURE AUDIO PURE AUDIO SELECTOR SELECTOR VIDEO 1...

  • Page 45: Switching The Display

    Selecting an Audio Component Using the tone control: To make bass and treble adjustment work for multichannel sources, you must first set the tone control to “On.” To turn on the tone control: 1. Press the SURROUND button (or SURR button on the remote controller).

  • Page 46: Listening Modes

    Listening Modes The TX-SR701/701E/601/601E’s surround sound enables you to enjoy the presence of a movie theater or concert hall in your room. The configuration of the speakers is very important for the surround sound. Refer to “Connecting speakers” on page 25. Before using a listening mode, make sure the Speaker Config, Speaker Distance, and Level Calibration parameters have been set (see pages 31 to 36).
  • Page 47 Listening Modes • THX Cinema This is the conventional 5.1-channel THX format. This mode should be used only when playing back sources that were mixed for playback in large movie theater environments. • THX Surround EX “THX Surround EX - Dolby Digital Surround EX” is a joint development of Dolby Laboratories and the THX division of THX Ltd.

  • Page 48: Selecting A Listening Mode (Tx-Sr701/701E)

    Listening Modes TX-SR701/701E Listening mode buttons STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO PHONES DIRECT/ AUDIO PURE AUDIO VIDEO 1 VIDEO 2 VIDEO 3 SELECTOR PURE AUDIO VCR 1 VCR 2 Selecting a listening mode (TX-SR701/701E) • Refer to pages 46, 47 for more details of listening modes. •...

  • Page 49: Re-Eq Function For Movies (Tx-Sr701/701E Only)

    Listening Modes THX: Changes the listening mode to the THX listening mode. If the THX listening mode is selected • While playing back Dolby Digital sources Switches the THX Surround EX mode (Auto → On → Off) if the source is a THX Surround EX-compatible source. •...

  • Page 50: Selecting A Listening Mode (Tx-Sr601/601E)

    Listening Modes TX-SR601/601E Listening mode buttons STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP DIRECT PHONES AUDIO VIDEO 1 VIDEO 2 VIDEO 3 SELECTOR VCR 1 VCR 2 Selecting a listening mode (TX-SR601/601E) • Refer to pages 46, 47 for more details of listening modes. •...

  • Page 51: Original Filter (Cinemafilter) Loading For Movies (Tx-Sr601/601E Only)

    Listening Modes DSP: Changes the listening mode for the signal type that is currently being input from the selected input source as shown below. Orchestra → Unplugged → Studio-Mix → TV Logic → All Ch Stereo → Mono → T-D → Mono Movie → Enhance → Orchestra. If pressed, the corresponding settings in the “Input Setup”...

  • Page 52: Input Setup

    Input Setup STANDBY/ON POWER STANDBY REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 VIDEO 2 PURE AUDIO VCR 1 VCR 2 Input source buttons This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the TX-SR701/701E/601/601E.
  • Page 53 Input Setup b. Component Video The video signal from the input jacks set at the “b. Component Video” setting is output to the COMPONENT VIDEO OUT jacks. Use this setting if you connect monitors like TV to the COMPONENT VIDEO OUT jacks on the TX-SR701/701E/601/601E. For example, when you connect the DVD player to the COMPONENT VIDEO INPUT 1 jacks, select “DVD”...
  • Page 54 Input Setup The listening mode will be reset to the mode you set here after turning on the TX-SR701/701E/601/601E even if you change the listening mode using the LISTENING MODE buttons. When you set this setting to “Last Valid”, the listening mode will be the one you used before.

  • Page 55: Hardware Setup

    Hardware Setup Hardware Config To display the Hardware Config menu: 1. Display the main menu. 2. Use the cursor buttons to select “1. Hardware Config” and then press the ENTER button. The “Hardware Config” menu appears. TX-SR701/701E TX-SR601/601E * Menu ***************** * Menu ***************** 1.Speaker Config 1.Speaker Config...

  • Page 56: Preference

    Preference Preference To display the Preference menu: 1. Display the main menu. 2. Use the cursor buttons to select “6. Preference” and then press the ENTER button. The “Preference” menu appears. TX-SR701/701E TX-SR601/601E * Menu ***************** 1.Speaker Config 6.Preference 2.Speaker Distance *********************** 3.Level Calibration 4.Input Setup...

  • Page 57: Audio Adjust

    Audio Adjust AUDIO ADJUST STANDBY/ON POWER STANDBY LISTENING MODE REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO SURROUND PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE PURE AUDIO VCR 1 VCR 2 These settings are enabled depending on the listening mode or input signal.
  • Page 58 Audio Adjust Center Image DTS Neo:6 derives a center channel from two-channel PCM and analog sources. In cinema mode, for Lt/Rt film soundtracks, sounds steered to the center are subtracted from the left and right channels. In music mode, the intent in the front channels is less one of steering and more one of stabilizing the front image by augmenting it with a center channel, while preserving the original perspective of the stereo mix.
  • Page 59 Audio Adjust Front Expander In the Theater-Dimensional mode, the front expander function spreads out the stereo image in front of the listener. The created stereo image is as if the front speakers have been farther apart for the feeling of a wide sound space. This is especially useful for narrow listening angles of 20 degrees or less.

  • Page 60: Enjoying Music In The Remote Zone

    Enjoying music in the remote zone ZONE 2 indicator STANDBY/ON POWER STANDBY LISTENING MODE REC OUT ZONE LEVEL DISPLAY RT/PTY/TP STEREO SURROUND PHONES DIRECT/ AUDIO PURE AUDIO SELECTOR VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 PURE AUDIO VCR 1 VCR 2 Input source buttons ZONE 2...

  • Page 61: Recording

    Recording REC OUT OFF Notes: • You cannot record the surround effects. • Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be output to the DIGITAL OUTPUT (COAXIAL) and DIGITAL OUTPUT (OPTICAL) output. • There are some restrictions on recording digital signals. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.

  • Page 62: Recording Both The Audio And Video

    Recording Recording both the audio and video The TX-SR701/701E/601/601E also allows you to record the audio and video signals output from the VIDEO OUT 1 and 2 jacks. 1. Press the input source button for the source you want to record. VIDEO 1 VIDEO 2 VIDEO 3...

  • Page 63: Using Remote Controller

    The RCVR MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo cassette tape deck. Operation buttons: : Play : Stop...

  • Page 64: Controlling An Onkyo Dvd Player

    The DVD MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo DVD player. Operation buttons: ON: Turns DVD player on and off STANDBY: Turns DVD player off (Some sets may not respond to this button.

  • Page 65: Controlling An Onkyo Cd Player

    2. Press the desired operation button. The buttons shaded in the figure to the left are the operation CD MODE buttons that can be used to control an Onkyo compact disc player. Operation buttons: ON: Turns on and off the compact disc player (same as STANDBY...

  • Page 66: Controlling An Onkyo Md Recorder

    65, then this button cannot be used to operate Onkyo MD recorders. If this is the case, to operate an Onkyo MD recorder, you must first erase the satellite tuner code by following the directions given in “Erasing all the commands programmed under a MODE button”...

  • Page 67: Entering A Pre-Programming Code

    613. No. 600: This code is for Onkyo DVD players that have an terminal that you are connecting to the TX-SR701/701E/601/601E with an pointing the remote controller at the remote control sensor on the TX-SR701/701E/601/601E.

  • Page 68: Pre-Programming Codes

    BRAND SETTING No. DENON 602, 609 HITACHI KENWOOD MAGNAVOX 606, 613 MARANTZ MITSUBISHI 608, 613 ONKYO 600, 601, 613 PANASONIC PIONEER PROSCAN SONY TOSHIBA YAMAHA 609, 614 ZENITH 613, 615 BRAND SETTING No.

  • Page 69: Operating Your Programmed Remote Controller

    Operating your programmed remote controller After entering a pre-programming by following the procedure given above, the following modes become enabled for use. ENTER, DVD MODE (DVD Player Mode) Operations are the same as explained on page 64. SAT MODE (Satellite Tuner Mode) 1.

  • Page 70: Vcr Mode (Vcr Mode)

    Operating your programmed remote controller TV/VCR TV MODE TV/VCR VCR MODE (VCR Mode) 1. Press the VCR MODE button. The VCR MODE button lights. 2. Press the desired operation button. STANDBY The buttons shaded in the figure to the left are the operation buttons that can be used to control your VCR.

  • Page 71: Programming The Commands Of Remote Controllers For Other Devices Into The Remote Controller

    Programming the commands of remote controllers for other devices into the remote controller 2 to 6 inches (5 to 15 cm) Programming procedure When programming the commands of another remote controller to the RC-533M/515M remote controller, you must first decide under which MODE button you want the commands to be linked.

  • Page 72: Erasing The Programmed Command From One Button

    You may, however, use these buttons to program the codes for other remote controllers. If you wish to restore the Onkyo preset codes after you program new codes, you must first erase the new codes.

  • Page 73: Using The Macro Function

    Using the macro function What is the macro function? A macro function enables you to program a series of button operations (up to 16) on the remote controller into a single button. The series of operations are then called a macro. For example, to play a compact disc player connected to the TX-SR701/701E/601/ 601E normally, you must perform the following steps: 1.

  • Page 74: Erasing A Macro From The Macro 1 (Or 2) Button

    Using the macro function MACRO 1 Erasing a macro from the MACRO 1 (or 2) button 1. Press and hold down any one of the seven MODE SEND/LEARN buttons, press the MACRO 1 (or 2) button, and then indicator release both buttons. When you press the MODE button, it lights and the SEND/ LEARN indicator lights.

  • Page 75: Troubleshooting Guide

    © Turn off the power, wait five seconds, and then turn back on the power. • Internal fuse is blown. © Contact your Onkyo Service Center. Power turns on but no sound. • “Muting” is displayed. © Press the MUTING button on the remote controller to turn off muting (see page 45).

  • Page 76: Video And Audio

    Troubleshooting guide Stereo indicator lights, but sound is distorted and stereo separation is bad. • Station is too strong. © Change to FM indoor antenna (see page 29). • Multiple reflection of the radio waves because of tall buildings or mountains. ©...

  • Page 77: If One Of The Messages Shown Below Appears

    Troubleshooting guide If one of the messages shown below appears “Not available with headphones use” Operation not allowed because headphones are plugged into the TX-SR701/701E/601/601E. “Not available with Multichannel use” Operation not allowed while the multi-channel output is being used. “Not available in this Sp Config”...

  • Page 78: Specifications (Tx-Sr701/701E)

    Specifications AMPLIFIER SECTION Continuous average power output (FTC) 100 W per channel min. RMS at 8 Ω, All channels: 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 125 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.

  • Page 79: Specifications (Tx-Sr601/601E)

    Specifications (TX-SR601/601E) AMPLIFIER SECTION Continuous average power output (FTC) 85 W per channel min. RMS at 8 Ω, All channels: 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 110 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.
  • Page 80 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, HOMEPAGE N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039...

This manual is also suitable for:

Tx-sr701Tx-sr701eTx-sr601

Table of Contents