Controlling Other Components; Entering Remote Control Codes - Onkyo TX-SR703 Instruction Manual

TX-SR803_En.book Page 86 Friday, August 26, 2005 9:26 AM

Controlling Other Components

You can control your other components, including those
made by other manufacturers, with the remote controller.
This section explains how to:
• Enter the remote control code for a component that
you want to control (e.g., DVD, TV, VCR).
• Learn commands directly from another component's
remote controller (see page 89).
• Program the MACRO buttons to perform a sequence
of up to eight actions (see page 90).

Entering Remote Control Codes

To control another component, you must first enter the
appropriate remote control code to a REMOTE MODE
button. You'll need to enter a code for each component
that you want to control.
STANDBY
ON STANDBY
V1
1
Number
V4
4
buttons
CD
7
PHONO
+ 10
10
- - / - - -
INPUT SELECTOR
1
RECEIVER
RECEIVER
TAPE/AMP
TV
DIMMER
+
CH
DISC
ALBUM
-
PREV
CH
DISPLAY
REC
STEREO
REPEAT
PURE A
TEST TONE
OPEN/CLOSE VIDEO OFF
1 Look up the appropriate remote
control code in the Remote Con-
trol Codes list.
The codes are organized by category.
86
Remote
indicator
T V
I INPUT
TV I
V2 V3
+
2 3
T V CH
MULTI CH DVD
5 6 -
TAPE TUNER
8 9
T V VOL
0 CLEAR
11 12
MACRO
2 3 ZONE2
REMOTE MODE
DVD CD HDD
REMOTE
VCR CABLE SAT MODE
CDR MD
SLEEP
ENTER VOL
MUTING
PLAYLIST RANDOM
LISTENING MODE
SURR
AUDIO SUBTITLE PLAY MODE
DIRECT THX ALLST
CH SEL LEVEL LEVEL
L NIGHT Re-EQ
RC-620M
2
While holding down the REMOTE
MODE button to which you want
REMOTE MODE
to enter the code, press the
DVD
CD
[STANDBY] button.
TV VCR
The Remote indicator lights up.
CABLE SAT
CDR MD
STANDBY
3 Within 30 seconds, use the num-
ber buttons to enter the 4-digit
V1 V2 V3
remote control code.
1 2 3
V4 MULTI CH DVD
The Remote indicator flashes twice.
4 5 6
CD TAPE TUNER
7 8 9
0
11
4
Press the REMOTE MODE button
again to select the remote con-
troller mode, point the remote
controller at the component, and
check the operation.
If the remote controller doesn't work as
expected, and several remote codes are
listed, try each one in turn and use the
one that works best.
Notes:
• Remote control codes cannot be entered for the
[RECEIVER] and [HDD] REMOTE MODE buttons.
• The remote control codes provided are correct at the
time of printing, but are subject to change.
• The HDD remote mode can only be used with the
Onkyo DS-A1 Remote Interactive Dock at this
time.
• The [DVD] and [CD] REMOTE MODE buttons
are preprogrammed for use with Onkyo DVD
players and CD players respectively.
* To control another manufacturer's CD recorder or
MD recorder, enter the appropriate control code to
the [CD] REMOTE MODE button.