Onkyo TX-SR703 Instruction Manual page 77

TX-SR803_En.book Page 77 Friday, August 26, 2005 9:26 AM
Advanced Setup —Continued
Character Edit
With this setting, you can enter a custom name for each
input source. When the input source is selected, its name
will appear on the display.
1 Press the [RECEIVER] REMOTE
RECEIVER
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "4. Input Setup,"
and then press [ENTER].
ENTER
The Input Setup menu appears.
4.Input Setup
---------VIDEO1---------
1.Delay
2.Character Edit
ENTER
3
Use the Up and Down [
buttons to select "Character
Edit," and then press [ENTER].
ENTER
The Character Edit menu appears.
4-2.Character Edit
---------VIDEO1---------
a.Character Display
ENTER b.Character
Press to Edit
4
Use the Up and Down [
buttons to select "Character Dis-
play," and use the Left and Right
ENTER
[ ]/[ ] buttons to select:
No (Default): The default name is
ENTER
This setting determines if the default
name or the custom name you enter is
displayed when the input source is
selected.
]/[ ]
]/[ ]
:Yes
:
to Clear
]/[ ]
displayed.
Yes: The custom name is
displayed.
5
Press the Down [
select "Character," and then
ENTER
press the Right [
open the character input screen.
4-2.Character Edit
---------VIDEO1---------
b.Character
: ---+
|ABCDEFGHIJKLM|
ENTER
|NOPQRSTUVWXYZ|
|abcdefghijklm|
|nopqrstuvwxyz|
|0123456789-.'|
|()+*/=,:;!?_ |
|
+-------------+
6
Use the arrow [
buttons to select a character, and
then press [ENTER].
ENTER
ENTER
7 Repeat step 6 to enter up to 10
characters.
If you enter a character by mistake:
Press the [RETURN] button to move
the cursor back one place.
To correct a character:
1. Press the [ENTER] or [RETURN]
button repeatedly to select the char-
acter to be corrected.
2. Use the Left and Right [
buttons to select the new character,
and then press [ENTER].
If the name contains less than 10 char-
acters, select "Exit," and then press
[ENTER].
8
Press the [SETUP] button.
Setup closes.
To delete all the characters in a name:
In step 5, press the Left [ ] button instead of the Right
[ ] button.
Notes:
• When the multichannel input is selected, the same
name as for DVD is displayed.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
] button to
] button to
[Exit]|
]/[ ]/[ ]/[ ]
]/[ ]
77