Remote Ids - Onkyo TX-SR703 Instruction Manual

TX-SR803_En.book Page 80 Friday, August 26, 2005 9:26 AM
Advanced Setup —Continued

Remote IDs

Remote
indicator
ON STANDBY
V1
Number
1
buttons
V4
4
CD
7
PHONO
+ 10
10
- - / - - -
INPUT SELECTOR
1
RECEIVER
RECEIVER
TAPE/AMP
TV
DIMMER
+
ENTER
CH
DISC
ALBUM
-
PREV
CH
DISPLAY
REC
Changing the AV Receiver's Remote ID
When several Onkyo components are used in the same
room, their remote ID codes may overlap. To differenti-
ate the AV receiver from the other components, you can
change its remote ID from 1, the default, to 2 or 3.
Note:
If you change the AV receiver's remote ID, be sure to set
the remote controller to the same ID (see next column).
1
Press the [RECEIVER] REMOTE
RECEIVER
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "8. Hardware
Setup," and then press [ENTER].
ENTER
The Hardware Setup menu appears.
ENTER
80
T V
TV INPUT
INPUT
I
V2 V3
+
2 3
MULTI CH DVD T V CH
-
5 6
TAPE TUNER
8 9
T V VOL
0 CLEAR
11 12
MACRO
2 3 ZONE2
REMOTE MODE
DVD CD HDD
VCR CABLE SAT
CDR MD
SLEEP
ENTER VOL
SETUP
MUTING
PLAYLIST RANDOM
]/[ ]
3
Use the Up and Down [
buttons to select "Remote ID,"
and use the Left and Right
ENTER
[ ]/[ ] buttons to select ID 1, 2,
or 3.
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format
ENTER
c.AM Freq. Step: 9kHz
d.Remote ID d.Remote ID
4 Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons
and [ENTER] button.
Changing the Remote Controller's ID
To differentiate the remote controller from other Onkyo
components, you can change its remote ID so that it
matches the AV receiver's Remote ID setting.
Note:
If you change the remote controller's remote ID, be sure
to set the AV receiver to the same ID. Otherwise, you
won't be able to control it (see previous column).
1 Press and hold down the
[RECEIVER] REMOTE MODE but-
RECEIVER
ton, and then press the TV
[INPUT] button.
The Remote indicator flashes four
times.
2 Use the number buttons to enter
remote control ID 1, 2, or 3.
V1 V2 V3
The Remote indicator flashes twice.
1 2 3
]/[ ]
:Auto
:1 :1