Programmable Charging - Fiat DOBLO Owner's Handbook Manual

Cancelling the charging process
Note
At public charging stations, the cancelling
and subsequent resuming of the charging
process may cause additional costs.
Once the charging process has started, only
the driver's door can be unlocked without
cancelling the charging process. Therefore,
activate the driver's door only function in the
vehicle personalisation.
Press < on the remote control to cancel
the charging process at any time.
Press < twice to cancel the charging
process at any time if the function driver's
door only is activated in the vehicle
personalisation.
Central locking system 3 9.
Vehicle personalisation 3 89.
Stop charging
The high voltage battery is fully charged
if the status indicator on the charging port
permanently illuminates green.
1. Unlock the vehicle before removing
the vehicle plug from the charging
port.
If the vehicle is already unlocked, lock
the vehicle and unlock it again.
2. Disconnect the vehicle plug of the
charging cable from the charging port
within 30 seconds after unlocking.
3. Close the charging port flap by
pressing firmly in the centre to latch
properly.
4. Disconnect the charging cable from
the external power source.
5. If necessary, store the charging cable
in the load compartment.
While the charging cable is plugged into
the vehicle, the vehicle cannot be driven.

Programmable charging

By default, charging starts as soon as the
charging cable is connected to the
charging port of the vehicle. It is also
possible to schedule the charging by
using the Info Display or the app.
Programmable charging is only possible
when charging at a domestic electrical
outlet / Green'Up socket or a wall box.
Note
On vehicles without integrated navigation
system, programmable charging can only be
used via the app.
1. Press m.
2. Select Charge.
3. Press /.
211