Tail Lights - Fiat DOBLO Owner's Handbook Manual

3. Replace and insert the new bulb into
socket by turning clockwise.
4. Insert the bulb socket into the
reflector and turn clockwise.

Tail lights

Light assembly in the body
Vehicle with tailgate
1. Unscrew and remove the two
screws.
2. Carefully withdraw the tail light
assembly from recess and remove.
Take care that the cable duct remains
in position.
3. Detach the cable from the retainer.
4. Press the retaining lug backwards,
pull the bulb carrier and disengage
the remaining retaining lugs.
5. Push the bulb slightly down, turn it
and remove it from the bulb carrier.
Replace the bulb:
Rear fog light (1)
Reversing light (2)
Turn light / hazard warning flasher (3)
Tail light / brake light (4)
6. Attach the bulb carrier to the light
assembly.
7. Attach the cable to the retainer.
8. Attach the light assembly to the
vehicle body and tighten both
screws.
231