Seat Folding - Fiat DOBLO Owner's Handbook Manual

Seat folding

Depending on version, the front
passenger seat can be folded flat to the
table position.
Folding single seat front passenger
side
Slide the front passenger seat as far back
as possible, to avoid contact with the
instrument panel during folding.
Push the head restraint down or remove
it before folding backrest 3 26.
Depending on version, remove the
armrest 3 30.
Push lever, fold backrest fully forwards
and release the lever. Then push the
backrest down further until it is
completely flat.
Unfolding single seat front
passenger side
To restore the seat to the upright
position, pull up the backrest as far as it
will go.
Pull the lever and raise backrest fully then
release the lever.
Folding bench seat front passenger
side
Fold down the centre backrest by pulling
the loop.
Fold down the outer backrest by pulling
the loop. Swing the backrest forwards
until the seat is lowered on the vehicle
floor.
When retracted, the maximum weight on
the backrest is 50 kg.
To lift the seat cushion pull the lever and
raise the seat cushion against the
backrest until it locks.
29