Fiat DOBLO Owner's Handbook Manual page 58

3. Secure the flap with the rod.
Closing the flap
1. Fix the rod in the bracket.
2. Close the flap and lock the locking
device.
3. Restore the seats to the upright
position 3 29, 31
56
Fitting the protective cover
The protective cover must be installed
whenever the side seat backrest is folded
down and the partition flap is open.
1. Attach the four snap hooks of the
cover on the corresponding lashing
eye.
2. Pull the head restraint from the folded
backrest, leaving two notches visible
on the head restraint rod 3 26.
3. Load the objects.
4. Pass the strap of the cover around
the head restraint. Tension the strap
by pulling at the loose end.
If the loading is stored on the front
and rear seat at the passenger side
pass one strap on each head
restraint.
With fitted protective cover the maximum
load on each of the folded backrests is
100 kg.