Fiat DOBLO Owner's Handbook Manual page 186

Hide thumbs Also See for DOBLO:
Table of Contents

Advertisement

the vehicle because the brake pedal, the
accelerator pedal and the cancel switch
have priority over any adaptive cruise
control operation.
Switching on the system
The adaptive cruise control can be
switched on at a speed between
40 km/h / 25 mph and 150 km/h /
93 mph.
A precondition is that adaptive cruise
control is not deactivated in the vehicle
personalisation menu 3 89.
Turn to CRUISE, the symbol w and a
message are displayed in the Driver
Information Centre. The system is still not
active.
184
Activation
Setting the speed manually
Accelerate to the desired speed and
press SET/+ or SET/-. The current
speed is stored and maintained.
Accelerator pedal can be released.
The preset speed can then be changed
by pressing SET/+ to increase or SET/-
to decrease the speed. Short press
changes speed in small steps, long press
in large steps.
Speed value is indicated in the Driver
Information Centre.
Adopting the speed by the speed
limit recognition
The intelligent speed adaptation informs
the driver when a speed limit is detected
by the speed limit recognition. The
detected speed limit can be used as new
value for the adaptive cruise control.
Using a camera at the top of the
windscreen, this system detects and
reads speed limit and end of speed limit
signs. The system also takes account of
information on speed limits from the
navigation map data.

Advertisement

Table of Contents
loading

Table of Contents