Jump Starting; Jump Starting - Fiat DOBLO Owner's Handbook Manual

3. Ensure the jack is correctly
positioned under the relevant vehicle
jacking point.
4. Set the jack to the necessary height.
Position it directly below the jacking
point in a manner that prevents it from
slipping.
Ensure that the edge of the body fits
into the notch of the jack.
244
With the jack correctly aligned rotate
wheel wrench until wheel is clear of
the ground.
5. Unscrew the wheel nuts.
6. Change the wheel.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove jack.
9. Install the wheel wrench ensuring that
it is located securely and tighten each
bolt in a crosswise sequence.
Tightening torque is 115 Nm.
10. Align the valve hole in the wheel cover
with the tyre valve before installing.
Install wheel nut caps.
11. Stow the replaced wheel, the vehicle
tools and the adapter for the locking
wheel nuts.
12. Check the tyre pressure of the
installed tyre and the wheel nut
torque as soon as possible.

JUMP STARTING

Do not start with quick charger.
A vehicle with a discharged vehicle
battery can be started using jump leads
and the vehicle battery of another vehicle.
CAUTION
Never jump start another vehicle with an
electric vehicle.
9
WARNING
Be extremely careful when starting with
jump leads. Any deviation from the
following instructions can lead to injuries or
damage caused by battery explosion or
damage to the electrical systems of both
vehicles.
9
WARNING
Avoid contact of the battery with eyes,
skin, fabrics and painted surfaces. The
fluid contains sulphuric acid which can
cause injuries and damage in the event of
direct contact.
● Never expose the vehicle battery to
naked flames or sparks.
● A discharged vehicle battery can
already freeze at a temperature of
0 °C. Defrost the frozen battery
before connecting jump leads.