Fiat DOBLO Owner's Handbook Manual page 181

Control indicator m 3 80.
Switching on the system
Turn to CRUISE, the symbol v and a
message are displayed in the Driver
Information Centre. The system is still not
active.
Activation of the functionality
Setting the speed manually
Accelerate to the desired speed and
press SET/+ or SET/-. The current
speed is stored and maintained.
Accelerator pedal can be released.
The preset speed can then be changed
by pressing SET/+ to increase or SET/-
to decrease the speed. Short press
changes speed in small steps, long press
in large steps.
Speed value is indicated in the Driver
Information Centre.
Adopting speed by the speed limit
recognition
The intelligent speed adaptation informs
the driver when a speed limit is detected
by the speed limit recognition. The
detected speed limit can be used as new
value for the cruise control.
Using a camera at the top of the
windscreen, this system detects and
reads speed limit and end of speed limit
signs. The system also takes account of
information on speed limits from the
navigation map data.
The function can be deactivated or
activated in the personalisation menu
3 89.
If the cruise control is active, the
recognised speed limit will be displayed
in the Driver Information Centre and
MEM illuminates.
179