Load Compartment Cover - Fiat DOBLO Owner's Handbook Manual

1. Press the lever and disengage the
spring clip from the retainer by
pulling.
2. Lift the ladder flap.
3. Move past the point of resistance to
lock the ladder flap with the props.
Support bar
Rest long loads on the support bar.
50
1. Push the lever to the top.
2. Push the support bar a bit to the front
and then guide it down to the door
pillar.
3. Hold the long load in the angled
position.
4. Move the support bar below the load
to its original position. Fix it by
pressing the lever downwards past
the point of resistance.
The rear doors will only lock when the
support bar is installed.
5. Secure the loads firmly. The side
supports can be used as hooking
points.
Closing the ladder flap
1. Check that the support bar is
properly locked.
2. Lower the ladder flap.
3. Fix the spring clip in its retainer.

Load compartment cover

Rear luggage cover
Do not place any objects on the cover.
Closing the cover
Pull the load compartment cover towards
the rear and engage it in the side
brackets.
Opening the cover
Remove load compartment cover from
side brackets. Guide the cover until it is
fully rolled up.