Customer Programmable Features - Uconnect 3/3 Nav Display Settings - Fiat 500 2018 Owner's Manual

298 MULTIMEDIA
Customer Programmable Features — Uconnect 3/3
NAV Display Settings
Push the Settings button on the faceplate, to display the
settings menu screen. In this mode the Uconnect system
allows you to access programmable feature settings.
NOTE: Only one touchscreen area may be selected at a time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting and make
your selection. Once the setting is complete, either press
Setting Name
Display Mode
NOTE:
When the "Display Mode" feature is set to "Auto" the radio touchscreen's brightness is adjusted with all other instru-
ment panel displays and lights when they are adjusted using the instrument cluster display buttons on the right-hand
side of the instrument cluster display. When the "Display Mode" feature is set to "Manual" the radio screen brightness
can be adjusted independently using the "Brightness" feature below:
Brightness
Language
Touchscreen Beep
the back arrow button on the touchscreen or push the back
button on the faceplate to return to the previous menu.
Or press the "X" button on the touchscreen to close out of
the settings screen. Pressing the up or down arrow buttons
on the right side of the screen allows you to toggle up or
down through the available settings.
NOTE: All settings should be changed with the ignition in
the "AVV/MAR" position.
Display
After pressing the "Display" button on the touchscreen, the
following settings will be available:
Selectable Options
Auto
+
English
On
Manual
–
Español
Off
Français