Fiat DOBLO Owner's Handbook Manual page 243

● Take heavy objects out of the vehicle
before jacking up.
● No people or animals may be in the
vehicle when it is jacked-up.
● Never crawl under a jacked-up
vehicle.
● Do not start the vehicle when it is
raised on the jack.
● Before screwing in the wheel bolts,
clean them.
9
WARNING
Do not grease wheel bolts.
Tightening torques
9
WARNING
Ensure to use always the correct wheel
bolts if changing the wheels. When
installing the spare wheel for temporary
usage, the bolts for alloy wheel rims can
also be used.
CAUTION
If the vehicle is equipped with alloy wheel
rims, tighten the wheel bolts manually at
least for the first five turns.
Depending on the wheel rim material, two
different bolts are available.
Tightening torque for alloy wheel rims is
100 Nm.
Tightening torque for steel wheel rims is
115 Nm.
Use the correct wheel bolts for the
respective wheel rims.
Jacking positions
The jacking positions shown refer to the
use of lifting arms and accessory jacks
used for changing winter / summer tyres.
The rear arm position of the lifting
platform is centrically under the relevant
vehicle jacking point.
The front arm position of the lifting
platform is centrically under the relevant
vehicle jacking point.
241