Safety Net - Fiat DOBLO Owner's Handbook Manual

Fitting the protective cover
The protective cover must be installed
whenever the outer passenger seat
backrest is folded down and the partition
flap is open.
1. Fold the outer passenger seat
backrest 3 29.
2. Attach the four snap hooks of the
cover on the corresponding lashing
eye.
3. Pull the head restraint from the folded
backrest, leaving two notches visible
on the head restraint rod 3 26.
4. Load the objects.
5. Pass the strap of the cover around
the head restraint. Tension the strap
by pulling at the loose end.
With fitted protective cover the maximum
load on the folded backrest is 100 kg.

Safety net

Depending on version, the safety net can
be installed behind the rear seats or, if the
rear seat backrests are folded, behind
the front seats.
Passengers must not be transported
behind the safety net.
Installation
Behind the rear seats
● There are installation openings on
both sides in the roof frame above
the rear seats. Open the covers and
suspend and engage rod of net at
one side, compress rod and
suspend and engage at the other
side.
53