Fiat DOBLO Owner's Handbook Manual page 171

Do not accelerate while selecting a
mode. Never depress the accelerator
pedal and brake pedal at the same time.
When a driving mode is selected, the
vehicle slowly begins to creep when the
brake is released.
The engine can only be started with the
gear selector in position P or N. When
position N is selected, press the brake
pedal or apply the parking brake before
starting.
Type A
Turn the selector.
Park position P
To shift into P, turn the selector to P when
vehicle is stationary. In P, the front wheels
of the vehicle are blocked.
To shift out of P, depress the brake pedal
and select the desired mode.
Reverse mode R
To shift into and out of R, the vehicle
must be at standstill and the brake pedal
has to be depressed.
CAUTION
R while the vehicle is moving
Shifting into
forward could damage the automatic
R after the
transmission. Only shift into
vehicle has been stopped.
Neutral mode N
In this mode, the propulsion system does
not transfer torque to the wheels. To
restart the propulsion system when the
vehicle is already moving, use D only.
Automatic mode D
Note
In slippery conditions, operate the vehicle in
D for enhanced riding and handling
performance.
Manual mode M
In this mode, gears can be selected
manually by using the steering wheel
paddles.
M can be activated from D in each driving
situation and speed.
When in D press button M.
Type B
After selecting a mode, the selector will
return to the centre position.
Park position P
To shift into P, press button P when
vehicle is stationary. In P, the front wheels
of the vehicle are blocked.
To shift out of P, depress the brake pedal
and select the desired mode.
The vehicle shifts automatically into P
when
● the engine is switched off
● the driver's door is opened while the
vehicle's speed is below 2 km/h /
1 mph
Reverse mode R
To shift into and out of R, the vehicle
must be at standstill and the brake pedal
has to be depressed.
169