Driver Assistance Systems; Driver Assistance Systems; Cruise Control - Fiat DOBLO Owner's Handbook Manual

Hide thumbs Also See for DOBLO:
Table of Contents

Advertisement

Standard mode 2
This mode is calibrated for a low level of
wheel spin, based on the different types
of grip generally encountered in normal
day to day driving.
Everytime the ignition is switched off, the
system is automatically reset to this
mode.
Snow mode 3
This mode adapts to the grip conditions
encountered by each wheel when
starting.
When advancing, the system optimises
wheel spin to guarantee the best
acceleration based on the available
traction. Recommended in cases of deep
snow and steep inclines.
This mode is active up to a speed of
50 km/h / 30 mph.
Mud mode 4
This mode allows considerable wheel
spin at start-up for the wheel with the
least grip, this removes mud and re-
establishes traction.
Simultaneously, the wheel with the most
grip is provided with the most torque
possible.
This mode is active up to a speed of
80 km/h / 50 mph.
178
Sand mode 1
This mode allows a small amount of
simultaneous wheel spin on the two drive
wheels, enabling the vehicle to advance
and reduce the risk of sinking.
This mode is active up to a speed of
120 km/h / 75 mph.
CAUTION
Do not use the other modes on sand as
the vehicle may become stuck.

DRIVER ASSISTANCE SYSTEMS

9
WARNING
Driver assistance systems are developed
to support the driver and not to replace the
driver's attention.
The driver accepts full responsibility when
driving the vehicle.
When using driver assistance systems,
always take care regarding the current
traffic situation.

Cruise control

The cruise control can store and maintain
speeds above 40 km/h / 25 mph.
Additionally at least the third gear must
be engaged on manual transmission, on
automatic transmission position D or the
second or a higher gear in position M
must be selected.
Deviations from the stored speeds may
occur when driving uphill or downhill.
The system maintains the vehicle speed
at the preset speed by the driver, without
any action on the accelerator pedal.
The preset speed can be exceeded
temporarily by pressing the accelerator
pedal firmly.
The status and preset speed is displayed
in the Driver Information Centre.
Do not use the cruise control if it is not
advisable to maintain a constant speed.

Advertisement

Table of Contents
loading

Table of Contents