6-2
Display and Operating Components
6.2
Reset Button and Light-Emitting Diode
Reset Button
Light-emitting Diode
IAS COMPONENTS www.ias-components.com info@ias-components.com
The Reset button and a red light-emitting diode are arranged in the
section below the display.
Fig. 6-2:
Reset button and Stop LED
The Reset button can only be actuated with a tool, for instance with the tip
of a pencil.
Actuating the Reset button will reset the complete assembly and force a
restart of the unit without the supply voltages having to be turned off. At
the same time, the Ready contact will be opened (if present).
Note:
Actuation of the Reset button will abort processing of a running
program.
The light-emitting diode is a diagnostic / status indicator.
The states indicated by the light-emitting diode depend on the firmware
used and are included in the description of the particular system .
IndraControl L40
DOK-CONTRL-IC*L40*****-PR02-EN-P
Reset.tif