Fig. 9-5: Connector Coding - Bosch Rexroth IndraControl L40 Project Planning Manual

9-4
Structure of the Rexroth Inline Terminals
Connector Coding
IAS COMPONENTS www.ias-components.com info@ias-components.com
Important: Place only black connectors on supply terminals! The
terminal point jumpering ensures that the potential is
transmitted (if this feature is provided) via the
jumpering in the connector and not via the module
board.
It is possible to prevent the mismatching of connectors by coding socket
and connector.
1 A
1 2
1 1
Fig. 9-5: Connector coding
• For this purpose, put a coding profile into the coding keyway in the
socket (1) and pull it off the small plate (2) by rotation (Fig. 9-5, Fig. A).
• Use nippers to cut the respective coding tab off the connector
(Fig. 9-5, Fig. B).
Now, only socket and connector of the same coding fit together
(Fig. 9-5 /C).
1 B
1 C
DOK-CONTRL-IC*L40*****-PR02-EN-P
IndraControl L40
Steckerkodierung.FH9