Fig. 9-9: Labeling Of Modules - Bosch Rexroth IndraControl L40 Project Planning Manual

IndraControl L40
Additional Labeling
DOK-CONTRL-IC*L40*****-PR02-EN-P
IAS COMPONENTS www.ias-components.com info@ias-components.com
In addition to the above labeling of the module, you can label the slots,
terminal points and connections with zack marker strips (ZBFMs) and
labeling fields.
1

Fig. 9-9: Labeling of modules

There are various possibilities for labeling slots and terminal points:
1 You can label each connector individually with zack marker strips.
2 / 3 As an option,
This labeling field is available in two widths, either as labeling field
covering only one connector (2) or as labeling field covering four
connectors (3). Thus, you can label each channel individually with
continuous text. In the upper connector head, there is a keyway to
attach the labeling field on the connector(s). The labeling field can
be moved up and down. A small catch at both end positions
allows the labeling field to keep its position.
4 / 5 You can label each signal with zack marker strips. With double
signal connectors, the upper keyway (4) is provided for labeling
the signals 1/2, and the bottom keyway (5) for the signals 3/4.
6 The electronic socket provides the possibility of labeling each slot
individually with zack marker strips. If the connector is latched
onto the socket, this labeling is hidden.
You can clearly assign connector and slot by using the labeling field at the
connector and on the electronic socket.
Structure of the Rexroth Inline Terminals
3
2
4
5
you can use a
9-7
Modulbeschr.FH9
large labeling field.