Handling Residual Volumes; Options; Pipetting (Pip) - BRAND HandyStep touch Operating Manual

11 Pipetting (PIP)

10.4.2 Alternative access to the learn function
a.
Open Options via the
b.
Swipe the
c.
Return to the work menu via the
ð
The ... symbol indicates that the learn function is active.
10.4.3 Restarting the learn function
If while operating the device you notice that the pause time is too long or too short, you can restart
the learn function. Alternatively, you can also adjust the pause time manually.
10.4.4 Stopping or shortening the learn function
The first time the STEP button is pressed, a 10-second countdown begins. When the countdown ex-
pires, the learn function ends automatically.
•
To stop the learn function beforehand, tap on the X button.
•
To stop the learn function after you have dispensed liquid by holding the STEP button, tap on the
... button.
•
To use the calculated pause time immediately, hold down the STEP button.

10.5 Handling residual volumes

For information on handling residual volumes, see Switching to emptying, p. 78 and Aspirating liq-
uid, p. 76.

10.6 Options

a.
In the operating mode, tap on the symbol
ð
The Options menu appears.
Option
Add to Favorites
Learn pause time
Go to Multi-Disp
Operating Mode Help
11 Pipetting (PIP)
For information on the function of this mode, see Overview of modes, p. 72. For information on setting
the volume, speed, and other steps found in all modes, see Operation, p. 73.
86
Operating manual
button.
switch to the right.
button.
Meaning
Edits the time between the individual dispensing steps.
Starts the learn function.
Switches to the Multi-Disp operating mode. The volume set in Auto-
Disp mode is also set in the Multi-Disp operating mode.
Shows the help text for the mode.
.
HandyStep® touch, HandyStep® touch S 997486